Microplane model of cylindrical geometry for transversely isotropic polymer composites
In this paper, a microplane model based on cylindrical geometry where the cylinder axis coincides with the longitudinal direction is developed for a general 3D inelastic fracturing analysis by finite element method of transversely isotropic fiber reinforced polymer composites. The model bridges the...
| Autores: | , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2022 |
| País: | España |
| Institución: | Universitat Politècnica de Catalunya (UPC) |
| Repositorio: | UPCommons. Portal del coneixement obert de la UPC |
| Idioma: | inglés |
| OAI Identifier: | oai:upcommons.upc.edu:2117/388794 |
| Acceso en línea: | https://hdl.handle.net/2117/388794 https://dx.doi.org/10.1016/j.compstruc.2022.106807 |
| Access Level: | acceso abierto |
| Palabra clave: | Polymeric composites Fibrous composites Reinforced plastics Unidirectional Fiber reinforced polymer Constitutive behavior Fracture Strain-softening Finite element analysis Compostos polimèrics Compostos fibrosos Plàstics reforçats Àrees temàtiques de la UPC::Enginyeria dels materials |
| Sumario: | In this paper, a microplane model based on cylindrical geometry where the cylinder axis coincides with the longitudinal direction is developed for a general 3D inelastic fracturing analysis by finite element method of transversely isotropic fiber reinforced polymer composites. The model bridges the mesoscale material behavior to macroscale one using the stress equilibrium approach developed for cylindrical geometry. To this end, Microplane level stress–strain relations for tension, compression and shear for both longitudinal and transverse directions are formulated. An explicit algorithm is formulated and coded into a VUMAT user subroutine for use with ABAQUS. The model is suitable for the analysis and design of large structures made of fiber reinforced polymer composites unlike the competing mesoscale models because of its much lower computational cost. A detailed metodology for the calibration of the model is identified. The model is calibrated against the common test data available in the literature using this metodology and the predictive capacity of the model is demonstrated by comparing the model predictions with test data in longitudinal tension, lateral tension, longitudinal compression, lateral compression, longitudinal shear and rare size effect in bending tests including post-peak fracture available in the literature. |
|---|