Cathodoluminescence Characterization of Dilute Nitride GaNSbAs Alloys

The effects of ex situ annealing in N ambient and in situ annealing in As ambient on GaNSbAs/GaAs structures grown by molecular beam epitaxy were investigated by low temperature cross-sectional cathodoluminescence (CL). The amount and distribution of Sb was measured by energy dispersive spectroscopy...

Descripción completa

Detalles Bibliográficos
Autores: Navarro, A., Martínez Sacristán, Óscar, Galiana, Beatriz, Lombardero, I., Ochoa, M., García, I., Gabás, M., Ballesteros, Carmen, Jiménez López, Juan Ignacio, Algora, C.
Tipo de recurso: capítulo de libro
Fecha de publicación:2018
País:España
Institución:Universidad de Valladolid
Repositorio:UVaDOC. Repositorio Documental de la Universidad de Valladolid
OAI Identifier:oai:uvadoc.uva.es:10324/31326
Acceso en línea:https://doi.org/10.1007/s11664-018-6325-3
http://uvadoc.uva.es/handle/10324/31326
Access Level:acceso abierto
Palabra clave:Dilute nitrides, GaNSbAs, solar cells, cathodoluminescence, annealing
Descripción
Sumario:The effects of ex situ annealing in N ambient and in situ annealing in As ambient on GaNSbAs/GaAs structures grown by molecular beam epitaxy were investigated by low temperature cross-sectional cathodoluminescence (CL). The amount and distribution of Sb was measured by energy dispersive spectroscopy (EDS). The cross-sectional CL analysis of all samples reveals a shift of the near band edge (NBE) emission along the growth axis, presumably associated with a non-uniform incorporation of Sb during the growth process, in agreement with the Sb distribution measured by EDS in the as-grown sample. The NBE emission in the annealed samples presents a redshift with respect to the as-grown sample. This effect might be explained by a redistribution/activation of N in the GaNSbAs lattice since the Sb distribution measured by EDS does not reveal significant changes, within the error margin, with respect to the as-grown sample. The in situ annealed in the As overpressure sample shows the best properties for solar cells applications, i.e., a NBE peak position close to 1.0 eV and the lowest full width at half maximum of this emission.