Directionally Solidified Cobalt-Doped MgO-MgAl2O4 Eutectic Composites for Selective Emitters

Cobalt-doped MgO-MgAl2O4 eutectic composites were explored for their use as selective emitters for thermophotovoltaic devices. Eutectic ceramic rods with different cobalt content were directionally solidified by using the laser floating zone technique at two processing rates to obtain microstructure...

Descripción completa

Detalles Bibliográficos
Autores: Merino, Rosa I., Oliete, Patricia B., Moshtaghion, Bibi Malmal, Sola, Daniel, Peña, José I.
Tipo de recurso: artículo
Estado:Versión publicada
Fecha de publicación:2022
País:España
Institución:Universidad de Sevilla (US)
Repositorio:idUS. Depósito de Investigación de la Universidad de Sevilla
OAI Identifier:oai:idus.us.es:11441/146469
Acceso en línea:https://hdl.handle.net/11441/146469
https://doi.org/10.3390/app122010254
Access Level:acceso abierto
Palabra clave:Cobalt-doped selective emitters
Directionally solidified ceramic eutectics
MgO/MgAl2O4
Thermophotovoltaic
Descripción
Sumario:Cobalt-doped MgO-MgAl2O4 eutectic composites were explored for their use as selective emitters for thermophotovoltaic devices. Eutectic ceramic rods with different cobalt content were directionally solidified by using the laser floating zone technique at two processing rates to obtain microstructures with different domain sizes. Thermal emission between 1000 ◦C and 1500 ◦C and optical properties (reflectance and transmittance) at room temperature were measured in the Co-doped composites and the effect on microstructure and cobalt content was investigated. Thermal emission consisted of an intense broad band at about 1.67 µm matching with the bandgap of the InGaAs cell. The emission was ascribed to the de-excitation from the 4T1 (F) multiplet to the 4A2 (F) ground state of the thermally excited Co ions located in the tetrahedral sites of the MgAl2O4 phase. The selectivity of the thermal emission showed a decrease with the cobalt content due to the enhancement of other electronic transitions, which leads to keeping the cobalt content in these composites at low levels (<0.15% at Co) for their use as selective emitters.