A DC-DC multilevel boost converter with reduced inductor-current
This article proposes a PWM-controlled dc-dc converter, similar to the traditional multilevel boost converter, which can achieve a high output voltage with low voltage devices, and their input current is non-pulsating. Compared to the multilevel boost converter and to other similar single-inductor s...
| Autores: | , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2022 |
| País: | México |
| Institución: | Instituto Tecnológico y de Estudios Superiores de Occidente |
| Repositorio: | Repositorio Institucional del ITESO |
| Idioma: | inglés |
| OAI Identifier: | oai:rei.iteso.mx:11117/10829 |
| Acceso en línea: | https://hdl.handle.net/11117/10829 |
| Access Level: | acceso abierto |
| Palabra clave: | DC-DC Power Converters Multilevel Boost Converter Power Electronics PWM Converters |
| Sumario: | This article proposes a PWM-controlled dc-dc converter, similar to the traditional multilevel boost converter, which can achieve a high output voltage with low voltage devices, and their input current is non-pulsating. Compared to the multilevel boost converter and to other similar single-inductor single-transistor topologies, the inductor in the proposed converter drains a reduced amount of current compared to the input current (while maintaining a continuous input current), which results in reduced stored energy in the inductor for the same operating conditions and power rating. Theoretical analysis, simulation, and experimental results demonstrate the benefits of the proposed converter. |
|---|