Nanocolumnar CdS thin films grown by glancing angle deposition from a sublimate vapor effusion source

The glancing angle deposition (GLAD) technique was used to grow cadmium sulfide (CdS) thin films on glass and indium tin oxide (ITO)-coated glass substrates from a sublimate vapor effusion source. The samples were prepared under different incident deposition flux angles (?) of 0° , 20° and 80° , whi...

Descripción completa

Detalles Bibliográficos
Autores: Daza, Luis Germán, Rodríguez, Román Castro, Carrillo, Marco Cirerol, Martín-Tovar, Enrique Adrián, Gamboa, José Méndez, Esquivel, Rubén Medina, Quintana, Ignacio Pérez, Iribarren, Augusto
Tipo de recurso: artículo
Estado:Versión publicada
Fecha de publicación:2019
País:México
Institución:UNIVERSIDAD NACIONAL AUTÓNOMA DE MÉXICO
Repositorio:Journal of Applied Research and Technology
Idioma:inglés
OAI Identifier:oai:ojs2.localhost:article/659
Acceso en línea:https://jart.icat.unam.mx/index.php/jart/article/view/659
Access Level:acceso abierto
Palabra clave:Glancing angle deposition
Cadmium sulfide
Nanostructures
Thin film
Structural properties
Columnar structure
Descripción
Sumario:The glancing angle deposition (GLAD) technique was used to grow cadmium sulfide (CdS) thin films on glass and indium tin oxide (ITO)-coated glass substrates from a sublimate vapor effusion source. The samples were prepared under different incident deposition flux angles (?) of 0° , 20° and 80° , while both the substrate and the source were under rotation. The temperature of the source was 923.15 K. Scanning electron microscopy images showed that the GLAD method combined with the source produced dense nanocolumnar structures with height and diameters of ?200 and ?30 nm, respectively. The deposited films displayed a hexagonal structure with preferential (002) plane orientation and crystallites sizes between ?25 nm and ?35 nm. A maximum solar weighted transmission of ?92% was obtained for the sample prepared at ? = 80° , with a substrate/source rotation velocity ratio of 55/20 in the wavelength region of 400–900 nm. The average band-gap energy of the films was ?2.42 eV. Refractiveindexes between ?1.4 and ?2.4 at a 550 nm the wavelength was also obtained.