Assessment of extrusion-sonication process on flame retardant polypropylene by rheological characterization
In this work, the rheological behavior of flame retardant polypropylene composites produced by two methods: 1) twin-screw extrusion and 2) ultrasound application combined with a static mixer die single-screw extrusion is analyzed in detail; results are related to the morphology of the composites. Th...
| Autor: | |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2016 |
| País: | México |
| Institución: | Centro de Innovación Aplicada en Tecnologías Competitivas |
| Repositorio: | Repositorio Institucional de CIATEC |
| Idioma: | inglés |
| OAI Identifier: | oai:ciatec.repositorioinstitucional.mx:1019/193 |
| Acceso en línea: | http://ciatec.repositorioinstitucional.mx/jspui/handle/1019/193 |
| Access Level: | acceso abierto |
| Palabra clave: | info:eu-repo/classification/LEMD/Polipropileno info:eu-repo/classification/LEMD/Reología info:eu-repo/classification/cti/2 info:eu-repo/classification/cti/23 info:eu-repo/classification/cti/2306 info:eu-repo/classification/cti/230416 |
| Sumario: | In this work, the rheological behavior of flame retardant polypropylene composites produced by two methods: 1) twin-screw extrusion and 2) ultrasound application combined with a static mixer die single-screw extrusion is analyzed in detail; results are related to the morphology of the composites. The flame retardant polymer composites are composed of a polypropylene matrix, an intumescent flame retardant system and functionalized clay. Scanning electron microscopy revealed that the combination of the static mixer die and on-line sonication reduced particle size and improved the dispersion and distribution of the intumescent additives in the polypropylene matrix at the micrometric level. From linear viscoelastic properties, the Han, Cole-Cole and van Gurp-Palmen diagrams characterized the improved particle dispersion of the flame retardant additives. Two welldefined rheological behaviors were observed in these diagrams. These behaviors are independent on clay presence and concentration. In fact, the ultrasound device generates a 3D highly interconnected structure similar to a co-continuous pattern observed in polymer blends as evidenced by rheological measurements. This improvement in the dispersion and distribution of the additives is attributed to the combined effect of the static mixer die and on-line sonication that allowed reducing the additive content while achieving the optimum classification UL94-V0. |
|---|