Adaptation of a 1-D tool to study transient thermal in turbocharger bearing housing
[EN] The heat transfer model can be used in a one-dimensional (1-D) engine simulation. When the engine speed is reduced to zero, the codes have been upgraded to calculate transient turbocharger thermal conditions. The turbocharger model has been used as an external plugin. Analysis of the temperatur...
| Autores: | , , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2018 |
| País: | España |
| Institución: | Universitat Politècnica de València (UPV) |
| Repositorio: | RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia |
| Idioma: | inglés |
| OAI Identifier: | oai:riunet.upv.es:10251/122508 |
| Acceso en línea: | https://riunet.upv.es/handle/10251/122508 |
| Access Level: | acceso abierto |
| Palabra clave: | Turbocharger One-dimensional model Engine simulation code Heat transfer Engine hot stop Oil coke MAQUINAS Y MOTORES TERMICOS INGENIERIA AEROESPACIAL |
| Sumario: | [EN] The heat transfer model can be used in a one-dimensional (1-D) engine simulation. When the engine speed is reduced to zero, the codes have been upgraded to calculate transient turbocharger thermal conditions. The turbocharger model has been used as an external plugin. Analysis of the temperature evolution at different parts of the turbocharger is done by using a hot spot engine cycle. A turbocharger bypassing strategy is done by means of a 9 bypass valve system. By using this method, instabilities can be found in the binary on-off state of an engine. During engine hot-stops, the lack of oil flow inside the turbocharger makes the trapped oil in the bearings burnt as the turbine housing exchanges heat with the central housing. Coke formation can appear and produce big reductions in turbocharger endurance, as bearings clogged and damage the shaft. Several strategies can be used in order to minimize possibilities of coke formation, including an increase in the turbocharger cooling during normal operation and the use of electrically-driven pumps acting after the engine is shut down. These strategies can be simulated in acceptable calculation times thanks to modelling strategy proposed in this paper. The presented methodology allows a detailed study of the temperature rise of the central housing of an automotive turbocharger after a hot-stop process, simulating several combinations of cooling strategies in order to find the optimum one in terms of minimising extra energy consumption per K of housing temperature reduction. |
|---|