Fast 3-D heat transfer model for computing internal temperatures in the bearing housing of automotive turbochargers
[EN] Each of the elements that make up the turbocharger has been gradually improved. In order to ensure that the system does not experience any mechanical failures or loss of efficiency, it is important to study which engine operating conditions could produce the highest failing rate. Common failing...
| Autores: | , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2018 |
| País: | España |
| Institución: | Universitat Politècnica de València (UPV) |
| Repositorio: | RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia |
| Idioma: | inglés |
| OAI Identifier: | oai:riunet.upv.es:10251/145413 |
| Acceso en línea: | https://riunet.upv.es/handle/10251/145413 |
| Access Level: | acceso abierto |
| Palabra clave: | Turbocharger Thermal characterization 3D heat transfer model FEM Central housing Bearing system Oil damage INGENIERIA AEROESPACIAL MAQUINAS Y MOTORES TERMICOS |
| Sumario: | [EN] Each of the elements that make up the turbocharger has been gradually improved. In order to ensure that the system does not experience any mechanical failures or loss of efficiency, it is important to study which engine operating conditions could produce the highest failing rate. Common failing conditions in turbochargers are mostly achieve due to oil contamination and high temperatures in the bearing system. Thermal management becomes increasingly important for the required engine performance. Therefore, it has become necessary to have accurate temperature and heat transfer models. Most thermal design and analysis codes need data for validation; often the data available falls outside the range of conditions the engine experiences in reality leading to the need to interpolate and extrapolate disproportionately. This paper presents a fast 3D heat transfer model for computing internal temperatures in the central housing for non-water cooled turbochargers and its direct validation with experimental data at different engine operating conditions of speed and load. The presented model allows a detailed study of the temperature rise of the central housing, lubrication channels, and maximum level of temperature at different points of the bearing system of an automotive turbocharger. It will let to evaluate thermal damage done to the system itself and influences on the working fluid temperatures, which leads oil coke formation that can affect the performance of the engine. Thermal heat transfer properties obtained from this model can be used for to feed and improve a radial lumped model of heat transfer that predicts only local internal temperatures[1]. Model validation is illustrated and finally the main results are discussed. |
|---|