Impact of Raster Angle on 3D Printing of Poly(Lactic Acid)/Thermoplastic Polyurethane Blends: Effects on Mechanical and Shape Memory Properties
[EN] In this study, a 60:40 blend of poly(lactic acid) and thermoplastic polyurethane (PLA/TPU) is fabricated using fused material extrusion. The morphological, thermal, mechanical and thermoresponsive cyclic shape memory effect (SME) characteristics of 3D-printed specimens at various raster angles...
| Autores: | , , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2025 |
| País: | España |
| Institución: | Universitat Politècnica de València (UPV) |
| Repositorio: | RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia |
| Idioma: | inglés |
| OAI Identifier: | oai:riunet.upv.es:10251/220003 |
| Acceso en línea: | https://riunet.upv.es/handle/10251/220003 |
| Access Level: | acceso abierto |
| Palabra clave: | 3D printing Fused material extrusion Poly(lactic acid) PLA Raster angle Shape memory Thermoplastic polyurethane TPU |
| Sumario: | [EN] In this study, a 60:40 blend of poly(lactic acid) and thermoplastic polyurethane (PLA/TPU) is fabricated using fused material extrusion. The morphological, thermal, mechanical and thermoresponsive cyclic shape memory effect (SME) characteristics of 3D-printed specimens at various raster angles are investigated. This work introduces the innovative utilization of TPU's fibrillar alignment within a PLA matrix to achieve enhanced mechanical anisotropy and consistent shape memory performance. Morphological analysis reveals excellent printability, with the immiscible TPU phase forming submicron-diameter fibrils (approximate to 0.78 +/- mu m) within the PLA matrix, leading to significant improvements in toughness and elongation at break when aligned with the printing direction and the load. Tensile test demonstrates anisotropy, with 0 degrees raster specimens achieving a UTS of 16.1 +/- 0.2 MPa and elongation at 305.5 +/- 71.9%, compared to 4.5 +/- 0.6 MPa and 10.8 +/- 1.5% at 90 degrees. Notably, despite the mechanical anisotropy, shape fixity ratios exceeded 95% and recovery ratios between 91 and 95% were achieved across all raster angles, demonstrating robustness in thermomechanical properties. These findings offer valuable insights into the relationship between morphology, mechanical characteristics, and shape memory behavior of PLA/TPU blends fabricated using fused material extrusion, positioning the material as a strong candidate for biomedical applications requiring precise shape recovery performance. |
|---|