Carbon addition effects on microstructure and small-scale hardness for Ti(C,N)-FeNi cermets
The current study investigates the influence of carbon addition on the microstructural and micromechanical properties of Ti(C,N)-FeNi cermets with different ceramic/metal phase ratios. Evaluation of small-scale hardness is conducted by using high speed nanoindentation in conjunction with statistical...
| Autores: | , , , , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2019 |
| País: | España |
| Institución: | Universitat Politècnica de Catalunya (UPC) |
| Repositorio: | UPCommons. Portal del coneixement obert de la UPC |
| Idioma: | inglés |
| OAI Identifier: | oai:upcommons.upc.edu:2117/177340 |
| Acceso en línea: | https://hdl.handle.net/2117/177340 https://dx.doi.org/10.1016/j.ijrmhm.2019.105064 |
| Access Level: | acceso abierto |
| Palabra clave: | Materials -- Mechanical properties Cermet High speed indentation Hardness Mechanical mapping Massive indentation Statistical analysis Materials -- Propietats mecàniques Àrees temàtiques de la UPC::Enginyeria dels materials |
| Sumario: | The current study investigates the influence of carbon addition on the microstructural and micromechanical properties of Ti(C,N)-FeNi cermets with different ceramic/metal phase ratios. Evaluation of small-scale hardness is conducted by using high speed nanoindentation in conjunction with statistical analysis. It allows to gather extremely large data sets (40,000 imprints per grade and condition); and thus, detailed hardness mapping at the microstructure length scale. Subsequent statistical analysis was done by considering three mechanically distinct phases: Ti(C,N) particles, the metallic binder, and one exhibiting the composite behaviour (i.e.imprints probing two-phase regions). In general, it is found that porosity amount is reduced as ceramic/metal phase ratio decreases and carbon is added. Carbon addition is also observed to rise small-scale hardness, but only for two of the defined phases: metallic binder and the composite one. Similar trends are observed regarding the influence of ceramic/metal phase ratio and carbon addition on the inverse hardness-fracture toughness correlation measured under high applied loads. |
|---|