Microbubble generation in a co-flow device operated in a new regime
A new regime of operation of PDMS-based flow-focusing microfluidic devices is presented. We show that monodisperse microbubbles with diameters below one-tenth of the channel width (here w = 50µm) can be produced in low viscosity liquids thanks to a strong pressure gradient in the entrance region of...
| Autores: | , , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión aceptada para publicación |
| Fecha de publicación: | 2011 |
| País: | España |
| Institución: | Universidad de Sevilla (US) |
| Repositorio: | idUS. Depósito de Investigación de la Universidad de Sevilla |
| OAI Identifier: | oai:idus.us.es:11441/158943 |
| Acceso en línea: | https://hdl.handle.net/11441/158943 https://doi.org/10.1039/c0lc00731e |
| Access Level: | acceso abierto |
| Palabra clave: | Flow rate Article Gas flow Microbubble Pressure gradient Priority journal Viscosity |
| Sumario: | A new regime of operation of PDMS-based flow-focusing microfluidic devices is presented. We show that monodisperse microbubbles with diameters below one-tenth of the channel width (here w = 50µm) can be produced in low viscosity liquids thanks to a strong pressure gradient in the entrance region of the channel. In this new regime bubbles are generated at the tip of a long and stable gas ligament whose diameter, which can be varied by tuning appropriately the gas and liquid flow rates, is substantially smaller than the channel width. Through this procedure the volume of the bubbles formed at the tip of the gas ligament can be varied by more than two orders of magnitude. The experimental results for the bubble diameter db as function of the control parameters are accounted for by a scaling theory, which predicts db/w ∝ (µg/µℓ)1/12 (Qg/Qℓ )5/12 , where µg and µℓ indicate, respectively, the gas and liquid viscosities and Qg and Qℓ are the gas and liquid flow rates. As a particularly important application of our results we produce monodisperse bubbles with the appropriate diameter for therapeutical applications (db ≃5µm) and a production rate exceeding 105 Hz. |
|---|