Hydrogen peroxide pretreatment of aqueous phase product of hydrothermal sludge liquefaction for enhanced anaerobic and aerobic biodegradability

Wastewater treatment plants (WWTP) generate municipal sludge (MS) that contains high organic and inorganic matter, creating disposal challenges. Hydrothermal liquefaction (HTL) is a promising method for converting sludge into value-added products (biocrude oil, hydrochar) but generates a large volum...

Descripción completa

Detalles Bibliográficos
Autores: Rahman, Nahian, Eskicioglu, Cigdem|||0000-0002-7673-134X
Tipo de recurso: artículo
Fecha de publicación:2025
País:España
Institución:Universitat Politècnica de Catalunya (UPC)
Repositorio:UPCommons. Portal del coneixement obert de la UPC
Idioma:inglés
OAI Identifier:oai:upcommons.upc.edu:2117/441505
Acceso en línea:https://hdl.handle.net/2117/441505
https://dx.doi.org/10.1016/j.renene.2025.124263
Access Level:acceso abierto
Palabra clave:Municipal sludge
Hydrothermal sludge liquefaction aqueous
Hydrogen peroxide oxidation
Quencher
Anaerobic digestion
Aerobic biodegradability
Àrees temàtiques de la UPC::Enginyeria civil::Enginyeria hidràulica, marítima i sanitària
Descripción
Sumario:Wastewater treatment plants (WWTP) generate municipal sludge (MS) that contains high organic and inorganic matter, creating disposal challenges. Hydrothermal liquefaction (HTL) is a promising method for converting sludge into value-added products (biocrude oil, hydrochar) but generates a large volume of aqueous by-product (HTLaq) with soluble inhibitory organics to downstream biological treatment. This creates a bottleneck to incorporate HTL to WWTPs. This study investigated hydrogen peroxide (H2O2) pretreatment of HTLaq to improve its biodegradability for downstream treatment. Pretreatment with H2O2 dosages of 0.25, 0.50, and 0.75 g H2O2/g chemical oxygen demand (COD) of HTLaq, followed by quenching with sodium carbonate (Na2CO3), significantly reduced total COD (tCOD) and phenolic compounds. The highest tCOD removal (18%) occurred with 0.75 g H2O2/g COD, while the 0.25 g H2O2/g COD with Na2CO3 quencher showed the highest (63%) increase in cumulative methane yield under thermophilic conditions. Aerobic biodegradability index, quantified by biochemical oxygen demand (BOD)/tCOD ratio, also increased from 0.75 to 0.85. The results suggest that lowdosage H2O2 pretreatment enhances the biodegradability of HTLaq, making it more amenable for downstream biological treatment.