Mechanical and microstructural characterization of MCrAlY coatings produced by laser cladding: The influence of the Ni, Co and Al content
[EN] Laser metal deposition (LMD) and laser cladding (LC) are alternative methods to thermal spraying processes to produce dense, high-quality coatings. In this work, two MCrAlY coatings (M=Ni+Co) have been prepared onto stainless steel substrate using a coaxial LC technique under two different Ni/C...
| Authors: | , , , , |
|---|---|
| Format: | article |
| Publication Date: | 2018 |
| Country: | España |
| Institution: | Universitat Politècnica de València (UPV) |
| Repository: | RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia |
| Language: | English |
| OAI Identifier: | oai:riunet.upv.es:10251/155001 |
| Online Access: | https://riunet.upv.es/handle/10251/155001 |
| Access Level: | Open access |
| Keyword: | MCrAlY Laser cladding Thermal barrier coatings Nanoindentation hardness Elastic modulus Ductility CIENCIA DE LOS MATERIALES E INGENIERIA METALURGICA |
| Summary: | [EN] Laser metal deposition (LMD) and laser cladding (LC) are alternative methods to thermal spraying processes to produce dense, high-quality coatings. In this work, two MCrAlY coatings (M=Ni+Co) have been prepared onto stainless steel substrate using a coaxial LC technique under two different Ni/Co and Al proportions. The mechanical properties were then evaluated with microhardness, nanoindentation, and three-point bending tests. The microstructure and composition of coatings were characterized by X-ray Diffraction (XRD) analysis and Field Emission Electron Microscopy (FESEM) coupled to an Energy Dispersive Spectroscopy (EDS) detector. The study revealed that the ¿/ß phases formed in the MCrAlY coating microstructure result in a lower elastic modulus than the austenitic stainless steel substrate, while an inverse behavior for hardness was observed due the presence of the aluminum-rich ß-phase. Under flexural loads, the failure of coatings showed plasticity and anisotropy characteristics depending on the two laser tracks orientations evaluated. |
|---|