Power supply control of the OBSEA seafloor observatory
The aim of this paper is to present the design and construction process of the power supply needed for a remote data acquisition system. It is based on twelve AC to DC switching converters in a serial connection and a logic programmable controller (PLC). The energy is transmitted to the acquisition...
| Autores: | , , |
|---|---|
| Tipo de documento: | artigo |
| Data de publicação: | 2009 |
| País: | España |
| Recursos: | Universitat Politècnica de Catalunya (UPC) |
| Repositório: | UPCommons. Portal del coneixement obert de la UPC |
| Idioma: | inglês |
| OAI Identifier: | oai:upcommons.upc.edu:2117/8776 |
| Acesso em linha: | https://hdl.handle.net/2117/8776 |
| Access Level: | Acceso aberto |
| Palavra-chave: | Ocean engineering--Research Underwater imaging systems Programmable controllers--Design and construction Logic programming Dispositius lògics programables Programació lògica Control automàtic -- Aparells i instruments Omron (Robots industrials) -- Programació Àrees temàtiques de la UPC::Enginyeria electrònica::Electrònica de potència::Convertidors de corrent elèctric Àrees temàtiques de la UPC::Enginyeria electrònica::Electrònica de potència::Sistemes d'alimentació Àrees temàtiques de la UPC::Informàtica::Automàtica i control |
| Resumo: | The aim of this paper is to present the design and construction process of the power supply needed for a remote data acquisition system. It is based on twelve AC to DC switching converters in a serial connection and a logic programmable controller (PLC). The energy is transmitted to the acquisition system, which is located several kilometers away, by means of a cable. The supply system has been designed with a higher capacity than the current requirements of the subsea station and the controller decides constantly the best configuration required at each moment. |
|---|