Power supply control of the OBSEA seafloor observatory
The aim of this paper is to present the design and construction process of the power supply needed for a remote data acquisition system. It is based on twuelvw AC to DC switching converters in a serial connection and a logic programable controller (PLC). The energy is transmitted to the acquisition...
| Autores: | , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2010 |
| País: | España |
| Institución: | Universitat Politècnica de Catalunya (UPC) |
| Repositorio: | UPCommons. Portal del coneixement obert de la UPC |
| Idioma: | inglés |
| OAI Identifier: | oai:upcommons.upc.edu:2099/8517 |
| Acceso en línea: | https://hdl.handle.net/2099/8517 |
| Access Level: | acceso abierto |
| Palabra clave: | OBSEA Power Supply PLC Omron CPL1 Àrees temàtiques de la UPC::Enginyeria electrònica |
| Sumario: | The aim of this paper is to present the design and construction process of the power supply needed for a remote data acquisition system. It is based on twuelvw AC to DC switching converters in a serial connection and a logic programable controller (PLC). The energy is transmitted to the acquisition system, which is located several kilometers away, by means of a cable. The supply system has been designed with a higher capacity than the current requirements of the subsea station and the controller decides constantly the best configuration required at each moment. |
|---|