Alternative conducted immunity tests
Conducted immunity tests are always performed by the use of CDNs in laboratories in accordance with the standard EN61000-4-6. However, it is not always possible to use CDNs because of some limitations. If the EUT (Equipment Under Test) has large dimensions or high currents, it is not, most of the ti...
| Autores: | , , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2016 |
| País: | España |
| Institución: | Universitat Politècnica de Catalunya (UPC) |
| Repositorio: | UPCommons. Portal del coneixement obert de la UPC |
| Idioma: | inglés |
| OAI Identifier: | oai:upcommons.upc.edu:2117/103394 |
| Acceso en línea: | https://hdl.handle.net/2117/103394 https://dx.doi.org/10.1109/MEMC.0.7764249 |
| Access Level: | acceso abierto |
| Palabra clave: | Electromagnetic compatibility Current measurement Immunity testing Impedance Impedance measurement Industries Probes Standards Alternative CDN Conducted Immunity Current Probe EMC High Current Industry Mains Impedance Compatibilitat electromagnètica Instrumentació -- Mesurament Electrònica -- Mesuraments Àrees temàtiques de la UPC::Enginyeria electrònica::Instrumentació i mesura::Compatibilitat electromagnètica |
| Sumario: | Conducted immunity tests are always performed by the use of CDNs in laboratories in accordance with the standard EN61000-4-6. However, it is not always possible to use CDNs because of some limitations. If the EUT (Equipment Under Test) has large dimensions or high currents, it is not, most of the time, possible to send it to an EMC laboratory or to use CDNs during the test. As a consequence, usage of BCI probes is inevitable in industry. In this paper, we compared the laboratory setup installed with CDNs and alternative setups installed directly on mains without any CDNs in terms of loop impedances and injected loop currents. We also established a link based on the loop impedances and the injected currents on the test loops between the two setups. Finally, a first serious step was taken to establish the fundamentals of alternative conducted immunity tests based on the impedance measurements of test loops for industry. |
|---|