Two different incorporation routes of cellulose nanocrystals in waterborne polyurethane nanocomposites
The renewability, availability and low-cost of eco-friendly cellulose nanocrystals (CNC), have gaining attention for nanocomposites preparation due to their unique properties in the nanoscale and their water dispersibility, becoming a suitable reinforcement in waterborne polyurethane (WBPU) dispersi...
| Autores: | , , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2016 |
| País: | España |
| Institución: | Universidad del País Vasco |
| Repositorio: | Addi. Archivo Digital para la Docencia y la Investigación |
| OAI Identifier: | oai:addi.ehu.eus:10810/65255 |
| Acceso en línea: | http://hdl.handle.net/10810/65255 |
| Access Level: | acceso abierto |
| Palabra clave: | waterborne polyurethane nanocellulose nanocomposites thermomechanical properties atomic force microscopy |
| Sumario: | The renewability, availability and low-cost of eco-friendly cellulose nanocrystals (CNC), have gaining attention for nanocomposites preparation due to their unique properties in the nanoscale and their water dispersibility, becoming a suitable reinforcement in waterborne polyurethane (WBPU) dispersions. Thereby, a WBPU matrix with a high hard segment content (about 48 wt%) was synthesized resulting in a dispersion of low particle size with a narrow distribution analyzed by means of dynamic light scattering and visually stable over 6 months. The CNC reinforcement isolated from microcrystalline cellulose via acid hydrolysis lead to CNC with a high length/diameter aspect ratio of about 31, determined by atomic force microscopy. In the nanocomposites preparation, two incorporation routes were designed for analyzing the influence of CNC disposition in the nanocomposites films: the classical mixing by sonication or in-situ adding CNC in water during particles formation step. The influence of CNC addition route and their disposition in the final properties of nanocomposites were analyzed by Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, dynamic mechanical analysis, atomic force microscopy and dynamic water contact angle, observing considerable variations by adding 1 and 3 wt% of CNC. The reinforcement addition route influenced the WBPU–CNC interactions, which resulted more effective by the alternative in-situ incorporation method. The CNC incorporation restricted the crystallization of soft domains, in a higher extend in nanocomposites prepared by in-situ route, and improved the thermomechanical stability. The studied CNC incorporation routes lead to different dispositions of CNC in the matrix, resulting in different mechanical performance, providing a suitable stress transfer in the nanocomposite and diverse hydrophilic behavior, comparing with the WBPU matrix. |
|---|