Thermoelectric microsensor based on ultrathin Si films
We show the use as a thermal photosensor of a thermoelectric (TE) microsensor based on ultrathin suspended Si films. The reduced thickness of the structural films enhances the extremely large thermal insulation of the sensing area (~43 µW/K), since phonons scatter in the surfaces, and guarantees a r...
| Autores: | , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2018 |
| País: | España |
| Institución: | Universitat Autònoma de Barcelona |
| Repositorio: | Dipòsit Digital de Documents de la UAB |
| Idioma: | inglés |
| OAI Identifier: | oai:ddd.uab.cat:216973 |
| Acceso en línea: | https://ddd.uab.cat/record/216973 https://dx.doi.org/urn:doi:10.3390/proceedings2131517 |
| Access Level: | acceso abierto |
| Palabra clave: | Photosensor Thermoelectric effect and microsensor |
| Sumario: | We show the use as a thermal photosensor of a thermoelectric (TE) microsensor based on ultrathin suspended Si films. The reduced thickness of the structural films enhances the extremely large thermal insulation of the sensing area (~43 µW/K), since phonons scatter in the surfaces, and guarantees a reduced thermal mass (in the µJ/K range). The sensitivity of the device is evaluated by heating with an argon laser (λ = 457 nm) in the range 0-10 mW, reaching sensitivities of around 6 × 108 V/(W·m2) in high vacuum conditions and 5 × 107 V/(W·m2) in environments of air at atmospheric pressure. Open circuit voltage measurements with and without light illumination with a 406 nm diode laser operating at 4 mW were conducted at temperature differences up to 50 K between the central hot region and the Si frame. The slight decrease of the Seebeck coefficient is related to the increase of carriers by photogeneration. |
|---|