Co3O4 hollow nanotubes for the catalytic oxidation of C2-chlorinated VOCs
Structured Co3O4 catalysts with a hollow nanotube morphology were prepared by several synthesis routes based on the Kirkendall effect. The resulting samples were kinetically evaluated in the gas-phase oxidation of vinyl chloride and 1,2-dichloroethane, two model C2-chlorinated volatile organic compo...
| Autores: | , , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2023 |
| País: | España |
| Institución: | Universidad del País Vasco |
| Repositorio: | Addi. Archivo Digital para la Docencia y la Investigación |
| OAI Identifier: | oai:addi.ehu.eus:10810/63816 |
| Acceso en línea: | http://hdl.handle.net/10810/63816 |
| Access Level: | acceso abierto |
| Palabra clave: | cobalt oxide kirkendall effect hollow nanotubes catalytic oxidation vinyl chloride 1,2-dichloroethane |
| Sumario: | Structured Co3O4 catalysts with a hollow nanotube morphology were prepared by several synthesis routes based on the Kirkendall effect. The resulting samples were kinetically evaluated in the gas-phase oxidation of vinyl chloride and 1,2-dichloroethane, two model C2-chlorinated volatile organic compounds; and exhaustively characterised by means of BET measurements, X-ray diffraction, scanning electron microscopy with energy dispersive X-ray spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, thermogravimetry and temperature-programmed techniques (adsorption of ammonia and chlorinated VOC, O2-TPD, H2-TPR and TPO). The performance of the prepared nanotubes was essentially controlled by the presence of active oxygen species at the surface, which in turn depended on the Co2+/Co3+ molar ratio, and the adsorption capacity of the catalyst for the chlorocarbon. Both pollutants were efficiently converted to deep oxidation products at relatively low temperatures. In addition, the optimal catalyst exhibited an appreciable stability when operating during 120 h. |
|---|