Structure and Void Connectivity in Nanocolumnar Thin Films Grown by Magnetron Sputtering at Oblique Angles

The morphology and void connectivity of thin films grown by a magnetron sputtering deposition technique at oblique geometries were studied in this paper. A well-tested thin film growth model was employed to assess the features of these layers along with experimental data taken from the literature. A...

ver descrição completa

Detalhes bibliográficos
Autores: Álvarez, Rafael, Regodón Harkness, Guillermo Fernando, Acosta-Rivera, Hiedra, Rico, Víctor J., Alcalá, Germán, González-Elipe, Agustín R., Palmero, Alberto
Formato: artículo
Estado:Versión publicada
Fecha de publicación:2023
País:España
Recursos:Consejo Superior de Investigaciones Científicas (CSIC)
Repositorio:DIGITAL.CSIC. Repositorio Institucional del CSIC
OAI Identifier:oai:dnet:digitalcsic_::ee62229ff3b1be57135bdb936bd64244
Acesso em linha:http://hdl.handle.net/10261/330344
Access Level:acceso abierto
Palavra-chave:Magnetron sputtering
Oblique angle deposition
Nanocolumnar thin films
Porous coatings
Physical vapor deposition
Descrição
Resumo:The morphology and void connectivity of thin films grown by a magnetron sputtering deposition technique at oblique geometries were studied in this paper. A well-tested thin film growth model was employed to assess the features of these layers along with experimental data taken from the literature. A strong variation in the film morphology and pore topology was found as a function of the growth conditions, which have been linked to the different collisional transport of sputtered species in the plasma gas. Four different characteristic film morphologies were identified, such as (i) highly dense and compact, (ii) compact with large, tilted mesopores, (iii) nanocolumns separated by large mesopores, and (iv) vertically aligned sponge-like coalescent nanostructures. Attending to the topology and connectivity of the voids in the film, the nanocolumnar morphology was shown to present a high pore volume and area connected with the outside by means of mesopores, with a diameter above 2 nm, while the sponge-like nanostructure presented a high pore volume and area, as well as a dense network connectivity by means of micropores, with a diameter below 2 nm. The obtained results describe the different features of the porous network in these films and explain the different performances as gas or liquid sensors in electrochromic applications or for infiltration with nanoparticles or large molecules.