Design, implementation, and verification of an FPGA-based control system for a permanent-magnet motor drive built upon a three-phase four-level active-clamped inverter
At the present time, a DE0 board from Terasic/Altera, which includes a Field Programmable Gate Array (FPGA) Cyclone III, is used to control a three-phase four-level active-clamped inverter which drives a permanent-magnet motor. The project consists in designing a new FPGA-based control system that s...
| Autor: | |
|---|---|
| Tipo de recurso: | tesis de maestría |
| Fecha de publicación: | 2015 |
| País: | España |
| Institución: | Universitat Politècnica de Catalunya (UPC) |
| Repositorio: | UPCommons. Portal del coneixement obert de la UPC |
| Idioma: | inglés |
| OAI Identifier: | oai:upcommons.upc.edu:2099.1/26226 |
| Acceso en línea: | https://hdl.handle.net/2099.1/26226 |
| Access Level: | acceso abierto |
| Palabra clave: | Analog-to-digital converters Programmable logic devices GREP Multilevel FPGA Power Converter MAC Convertidors continu-altern Convertidors analògic/digitals Dispositius lògics programables Àrees temàtiques de la UPC::Enginyeria electrònica |
| Sumario: | At the present time, a DE0 board from Terasic/Altera, which includes a Field Programmable Gate Array (FPGA) Cyclone III, is used to control a three-phase four-level active-clamped inverter which drives a permanent-magnet motor. The project consists in designing a new FPGA-based control system that substitutes the current control system based on the DE0 board. The novel control system will consist of a single board containing a new FPGA more suitable for the specific application, the analog-to-digital converters, and all the necessary auxiliary circuitry. The FPGA content wi |
|---|