Boron-doped diamond by 9 MeV microbeam implantation: Damage and recovery
Diamond properties can be tuned by doping and ion-beam irradiation is one of the most powerful techniques to do it in a controlled way, but it also produces damage and other aftereffects. Of particular interest is boron doping which, in moderate concentrations, causes diamond to become a p-type semi...
| Autores: | , , , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2023 |
| País: | España |
| Institución: | Universidad Autónoma de Madrid |
| Repositorio: | Biblos-e Archivo. Repositorio Institucional de la UAM |
| Idioma: | inglés |
| OAI Identifier: | oai:repositorio.uam.es:10486/707239 |
| Acceso en línea: | http://hdl.handle.net/10486/707239 https://dx.doi.org/10.1016/j.carbon.2023.04.004 |
| Access Level: | acceso abierto |
| Palabra clave: | Boron-doped diamond Damage recovery Diamond crystal Ion beam modification of materials Ion-beam irradiation Raman spectroscopy Física |
| Sumario: | Diamond properties can be tuned by doping and ion-beam irradiation is one of the most powerful techniques to do it in a controlled way, but it also produces damage and other aftereffects. Of particular interest is boron doping which, in moderate concentrations, causes diamond to become a p-type semiconductor and, at higher boron concentrations, a superconductor. Nevertheless, the preparation of superconducting boron-doped diamond by ion implantation is hampered by amorphization and subsequent graphitization after annealing. The aim of this work was to explore the possibility of creating boron-doped diamond superconducting regions and to provide a new perspective on the damage induced in diamond by MeV ion irradiation. Thus, a comprehensive analysis of the damage and eventual recovery of diamond when irradiated with 9 MeV B ions with different fluences has been carried out, combining Raman, photoluminescence, electrical resistivity, X-ray diffraction and Rutherford Backscattering/Ion-channeling. It is found that, as the B fluence increases, carbon migrates to interstitial sites outside of the implantation path and an amorphous fraction increases within the path. For low fluences (∼1015 ions/cm2), annealing at 1000 °C is capable to fully recovering the diamond structure without graphitization. However, for higher fluences (≥5 × 1016 ions/cm2), those required for superconductivity, the recovery is important, but some disorder still remains. For high fluences, annealing at 1200 °C is detrimental for the diamond lattice and graphite traces appear. The incomplete healing of the diamond lattice and the interstitial location of B can explain that optimally doped samples do not exhibit superconductivity |
|---|