High frequency response of adenine-derived carbon in aqueous electrochemical capacitor
Electrochemical capacitors are attractive power sources, especially when they are able to operate at high frequency (high current regime). In order to meet this requirement their constituents should be made of high conductivity materials with a suitable porosity. In this study, enhanced power and si...
| Autores: | , , , , , , , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2022 |
| País: | España |
| Institución: | Universidad de Zaragoza |
| Repositorio: | Zaguán. Repositorio Digital de la Universidad de Zaragoza |
| OAI Identifier: | oai:zaguan.unizar.es:131677 |
| Acceso en línea: | http://zaguan.unizar.es/record/131677 |
| Access Level: | acceso abierto |
| Sumario: | Electrochemical capacitors are attractive power sources, especially when they are able to operate at high frequency (high current regime). In order to meet this requirement their constituents should be made of high conductivity materials with a suitable porosity. In this study, enhanced power and simultaneously high capacitance (120 F g-1 at 1 Hz or 10 A g-1) electrode material obtained from carbonized adenine precursor is presented. A micro/mesoporous character of the carbon with optimal pore size ratio and high surface area was proven by the physicochemical characterization. The beneficial pore structure and morphology resembling highly conductive carbon black, together with a significant nitrogen content (5.5%) allow for high frequency response of aqueous capacitor to be obtained. The carbon/carbon symmetric capacitor (in 1 mol L-1 Li2SO4) has been tested to the voltage of 1.5 V. The cyclic voltammetry indicates a good electrochemical response even at high scan rate (50 mV s-1). The cyclability of the capacitor is comparable to the one operating with commercial carbon (YP50F). The adenine-based capacitor is especially favourable for stationary applications requiring high power. |
|---|