Experimental demostration of an all-fiber polarization controller based on faraday rotation
An all-fiber device for the control of the state of polarization (SOP) is presented. The controller is high speed (its time response is less than 50 ms in the worst case), low loss (insertion losses are 2.5 dB independently of the input SOP), and low cost (is constructed with standard single-mode fi...
| Autores: | , , |
|---|---|
| Tipo de documento: | artigo |
| Data de publicação: | 1995 |
| País: | España |
| Recursos: | Universitat Politècnica de Catalunya (UPC) |
| Repositório: | UPCommons. Portal del coneixement obert de la UPC |
| Idioma: | inglês |
| OAI Identifier: | oai:upcommons.upc.edu:2117/97657 |
| Acesso em linha: | https://hdl.handle.net/2117/97657 https://dx.doi.org/10.1109/68.477272 |
| Access Level: | Acceso aberto |
| Palavra-chave: | Telecommunication Optical fibre losses Optical fibre polarisation Optical polarisers Optical fibres Faraday effect Magneto-optical devices Frequency shift keying Optical fibre communication Telecomunicació Àrees temàtiques de la UPC::Enginyeria de la telecomunicació |
| Resumo: | An all-fiber device for the control of the state of polarization (SOP) is presented. The controller is high speed (its time response is less than 50 ms in the worst case), low loss (insertion losses are 2.5 dB independently of the input SOP), and low cost (is constructed with standard single-mode fiber). The polarization controller has been implemented using two Faraday rotators and works at 1550 nm. We have also designed an algorithm that confers an endless performance to the device. The controller has been included in a 2.5 Gb/s CPFSK optical coherent system and results are presented here. |
|---|