Lessons learned from an intercalibration exercise on the quantification and characterisation of microplastic particles in sediment and water samples

An intercalibration exercise on the characterisation of microplastics in marine sediment and water samples was carried out among five laboratories involved in the implementation of the Marine Strategy Framework Directive (MSFD) in their country. The samples were prepared by mixing cleaned natural se...

ver descrição completa

Detalhes bibliográficos
Autores: Cadiou, Jf., Gerigny, O., Koren, S., Zeri, Christina, Kaberi, H., Alomar, Carme, Panti, Cristina, Fossi, Maria Cristina, Adamopoulou, A., Digka, Nikoletta, Deudero, Salud, Concato, M., Carbonell, Ana, Baini, Matteo, Galgani, François, Galli. M.
Formato: artículo
Fecha de publicación:2020
País:España
Recursos:Consejo Superior de Investigaciones Científicas (CSIC)
Repositorio:DIGITAL.CSIC. Repositorio Institucional del CSIC
OAI Identifier:oai:digital.csic.es:10261/318654
Acesso em linha:https://archimer.ifremer.fr/doc/00622/73397/72812.pdf
http://hdl.handle.net/10261/318654
Access Level:acceso abierto
Palavra-chave:Centro Oceanográfico de Baleares
Microplastics
Medio Marino y Protección Ambiental
Intercalibration
Protocols
Sediment
Seawater
Descrição
Resumo:An intercalibration exercise on the characterisation of microplastics in marine sediment and water samples was carried out among five laboratories involved in the implementation of the Marine Strategy Framework Directive (MSFD) in their country. The samples were prepared by mixing cleaned natural sediment and sea water with microplastics sets made of particles of various polymers, shapes and colours. Overall, the errors on total counts were under 25% in absolute value. The risk of non-detection and loss of particles is greater than the risk of contamination during sample analysis. Significant differences are observed among particle types. It appears difficult to obtain reliable and comparable data on the colour of microplastics. A comparison of the errors with regards to the protocols used led to recommend NaCl [1.2 g/cm3] density separation for sediment and one filtering step (200 μm). The operators' experience appears as a key factor for the quality of the results.