Spatial resolution of a preclinical PET tomograph

Positron emission tomography (PET) is an important molecular image modality and its application in preclinical research has increased during the last decades. Thus, in laboratory practice, it is important to implement a quality control of the equipment, since intrinsic factors influence the image qu...

ver descrição completa

Detalhes bibliográficos
Autores: Guilherme Cavalcante de Albuquerque Souza, Rodrigo Modesto Gadelha Gontijo, Juliana Batista da Silva, Marcelo Mamede, Andréa Vidal Ferreira
Formato: artículo
Estado:Versión publicada
Fecha de publicación:2021
País:Brasil
Recursos:Universidade Federal de Minas Gerais (UFMG)
Repositorio:Repositório Institucional da UFMG
Idioma:inglés
OAI Identifier:oai:repositorio.ufmg.br:1843/57384
Acesso em linha:http://hdl.handle.net/1843/57384
Access Level:acceso abierto
Palavra-chave:SPATIAL RESOLUTION
SMALL ANIMAL PET SCANNER
IMAGE QUALITY CONTROL
Tomografia por Emissão de Pósitrons
Diagnóstico por Imagem
Descrição
Resumo:Positron emission tomography (PET) is an important molecular image modality and its application in preclinical research has increased during the last decades. Thus, in laboratory practice, it is important to implement a quality control of the equipment, since intrinsic factors influence the image quality. The objective of this work was to perform and implement spatial resolution tests for the small animal PET scanner of the Molecular Imaging Laboratory, LIM/CDTN. Empirically, the spatial resolution of a PET scanner can be determined from the measurement of point or linear sources and FWHM (full width half maximum) analysis of the PET image. In this work, a point source of 22Na and a hot rod style phantom filled with the 18F-FDG solution were used. Acquisition and reconstruction of images were performed with the LabPET 1.12.1 software, provided by the equipment manufacturer. PeakFit® and Amide software were used to perform images post-processing. The results indicate that the PET scanner spatial resolution value is compatible with values reported in an international study performed on similar equipment.