Press selection and optimization of filter clothes for concentrates, tailings and sludge neutralization
The current paper has as target to study the selection´s criteria and sizing of filter press, also, the variables and design´s parameters that influence the proper performance of filtration applied to slurry concentrates, tailings and sludge neutralization. In summary, the importance of CAPEX and OP...
| Autor: | |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2014 |
| País: | Perú |
| Institución: | Universidad Nacional Mayor de San Marcos |
| Repositorio: | Revistas - Universidad Nacional Mayor de San Marcos |
| Idioma: | español |
| OAI Identifier: | oai:revistasinvestigacion.unmsm.edu.pe:article/11395 |
| Acceso en línea: | https://revistasinvestigacion.unmsm.edu.pe/index.php/iigeo/article/view/11395 |
| Access Level: | acceso abierto |
| Palabra clave: | Blinding Medio Filtrante Filtro Prensa Permeabilidad Performance de Filtración CAPEX (Costo de Capital) OPEX (Costo de Operación) Filter Clothes Filter Press Permeability Filtration´s Performance CAPEX (Capital Cost) OPEX (Operation Cost) |
| Sumario: | The current paper has as target to study the selection´s criteria and sizing of filter press, also, the variables and design´s parameters that influence the proper performance of filtration applied to slurry concentrates, tailings and sludge neutralization. In summary, the importance of CAPEX and OPEX when deciding to use a particular filter press. The filtering performance of concentrates and tailings in concentrator operations, also in neutralization in water treatment mine plants, can be evaluated from different points of view depending on the requirement of the operation, for example, you can say that a system filtration has acceptable performance if desired moisture percentage in the shortest possible cycle time, with the least amount of solids in the filtrate is obtained. Within this, it is essential to evaluate the efficiency of the filter clothes, plates, hydraulic system at the end of the filtration cycle. Similarly, the performance of the filter media exhibits a pattern that is related to the number of cycles, sieve analysis, slurry density, percent solids, and generally the quality and structure of the media. Thus, the clothes can be mechanically damaged by the abrasive. Another main reason that affects the performance of filtration is called Blinding effect. This paper will discuss this phenomenon too. |
|---|