Increase in Electrical Parameters Using Sucrose in Tomato Waste
The use of organic waste as fuel for energy generation will reduce the great environmental problems currently caused by the consumption of fossil sources, giving agribusiness companies a profitable way to use their waste. In this research, tomato waste with different percentages of sucrose (0-target...
| Autores: | , , , , , , , |
|---|---|
| Formato: | artículo |
| Fecha de publicación: | 2022 |
| País: | Perú |
| Recursos: | Universidad Autónoma del Perú |
| Repositorio: | AUTONOMA-Institucional |
| Idioma: | español |
| OAI Identifier: | oai:repositorio.autonoma.edu.pe:20.500.13067/2592 |
| Acesso em linha: | https://hdl.handle.net/20.500.13067/2592 https://doi.org/10.3390/fermentation8070335 |
| Access Level: | acceso abierto |
| Palavra-chave: | Waste Tomatoes Saccharose Microbial fuel cells Bioelectricity https://purl.org/pe-repo/ocde/ford#2.07.00 |
| Resumo: | The use of organic waste as fuel for energy generation will reduce the great environmental problems currently caused by the consumption of fossil sources, giving agribusiness companies a profitable way to use their waste. In this research, tomato waste with different percentages of sucrose (0-target, 5, 10, and 20%) was used in microbial fuel cells manufactured on a laboratory scale with zinc and copper electrodes, managing to generate maximum peaks of voltage and a current of 1.08 V and 6.67 mA in the cell with 20% sucrose, in which it was observed that the optimum operating pH was 5.29, while the MFC with 0% (target) sucrose generated 0.91 V and 3.12 A on day 13 with a similar pH, even though all the cells worked in an acidic pH. Likewise, the cell with 20% sucrose had the lowest internal resistance (0.148541 ± 0.012361 KΩ) and the highest power density (224.77 mW/cm2) at a current density of 4.43 mA/cm2 , while the MFC with 0% sucrose generated 160.52 mW/cm2 and 4.38 mA/cm2 of power density and current density, respectively, with an internal resistance of 0.34116 ± 0.2914 KΩ. In this sense, the FTIR (Fourier-transform infrared spectroscopy) of all the substrates used showed a high content of phenolic compounds and carboxylate acids. Finally, the MFCs were connected in a series and managed to generate a voltage of 3.43 V, enough to light an LED (green). These results give great hope to companies and society that, in the near future, this technology can be taken to a larger scale. |
|---|