Mass Production of Uniformly Sized Air-Filled Poly-Lactic Acid Microcapsules Made from Microbubble Templates

Hollow poly(Lactic Acid) (PLA) microcapsules were fabricated using the bubble template method. In this method, microbubbles nucleated inside droplets of a dichloromethane solution of PLA which were located in a continuous phase of poly(vinyl alcohol). PLA-covered microbubbles formed when PLA adsorbe...

ver descrição completa

Detalhes bibliográficos
Autores: Jay Molino, Svetlana Jojlova, Hirofumi Daiguji and, Fumio Takemura
Formato: artículo
Estado:Versión actualizada desde la publicación
Fecha de publicación:2019
País:Panamá
Recursos:Universidad Especializada de las Américas
Repositorio:Repositorio Institucional de la Universidad Especializada de las Américas
Idioma:español
OAI Identifier:oai:repositorio2.udelas.ac.pa:123456789/362
Acesso em linha:http://repositorio2.udelas.ac.pa/handle/123456789/362
Access Level:acceso abierto
Palavra-chave:Biodegradable Microcapsules
Drug Delivery
Mass Production of Hollow Capsules
Microencapsulation
Ultrasound Enhanced Fabrication
Ultrasound Contrast Agents
Descrição
Resumo:Hollow poly(Lactic Acid) (PLA) microcapsules were fabricated using the bubble template method. In this method, microbubbles nucleated inside droplets of a dichloromethane solution of PLA which were located in a continuous phase of poly(vinyl alcohol). PLA-covered microbubbles formed when PLA adsorbed to the bubble surface by physisorption. Then, the coated microbubbles were spontaneously released from the droplet´s interior into the continuous phase. To increase the production yield of hollow microcapsules in this method, ultrasound was applied to enhance bubble nucleation inside the droplets. Thus to attain uniform hollow PLA microcapsules, the optimum PLA concentration with ultrasound was 30 g L −1 , which is higher than that without ultrasound (2 g L−1 ). At the optimum concentration, the average radius was 0.54 µm, with a polydispersity index of 21.2%. It was found that the equilibrium size of the microbubble template radius was the same with and without ultrasound. The production yield had a tenfold increase when ultrasound was employed.