Diseño e implementación de un Túnel de viento para un para pruebas de aerogeneradores
The article shows the design and construction of a drive system for the speed control of an industrial fan that reproduces wind signals similar to those of the environment through a wind tunnel, for testing wind turbines. The speed is regulated by controlling the speed of the three-phase motor that...
| Autores: | , , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2015 |
| País: | México |
| Institución: | Universidad Autónoma de Zacatecas |
| Repositorio: | Repositorio Institucional Caxcán |
| Idioma: | español |
| OAI Identifier: | oai:http://ricaxcan.uaz.edu.mx:20.500.11845/1789 |
| Acceso en línea: | http://ricaxcan.uaz.edu.mx/jspui/handle/20.500.11845/1789 https://doi.org/10.48779/8m30-3w61 |
| Access Level: | acceso abierto |
| Palabra clave: | INGENIERIA Y TECNOLOGIA [7] Túnel de viento aerogeneradores control de ventiladores energía eólica |
| Sumario: | The article shows the design and construction of a drive system for the speed control of an industrial fan that reproduces wind signals similar to those of the environment through a wind tunnel, for testing wind turbines. The speed is regulated by controlling the speed of the three-phase motor that moves the fan using a SIEMENS speed variator. The system allows generating wind signals with a profile defined by a database whose values were measured with an anemometer or using regulated signals with constant values. For the implementation of the control system and the communication of the devices, a digital signal processor was used, which acts as an interface to transmit the data between the programming environment developed in VisSim and the control and regulation stage. |
|---|