Retention and absorption of boron salts solution of ten mexican woods

oron salts are a wood protector agent with a wide spectrum in their fungicidal and insecticide action and of low toxicity, odorless, colorless and nonflammable, and their application is one of the most effective preservation strategies. This research aims to determine the density of wood, absorption...

Descripción completa

Detalles Bibliográficos
Autores: Sotomayor-Castellanos, Javier-Ramón, Villaseñor-Aguilar, José-María
Tipo de recurso: artículo
Estado:Versión publicada
Fecha de publicación:2016
País:México
Institución:UNIVERSIDAD DE GUANAJUATO
Repositorio:Acta Universitaria
Idioma:español
OAI Identifier:oai:www.actauniversitaria.ugto.mx:article/835
Acceso en línea:https://www.actauniversitaria.ugto.mx/index.php/acta/article/view/835
Access Level:acceso abierto
Palabra clave:Density
wood preservation
hot-cold bath
porosity.
Densidad
preservación de la madera
baño caliente-frío
porosidad.
Descripción
Sumario:oron salts are a wood protector agent with a wide spectrum in their fungicidal and insecticide action and of low toxicity, odorless, colorless and nonflammable, and their application is one of the most effective preservation strategies. This research aims to determine the density of wood, absorption and retention of the boron salts of ten Mexican woods. The working hypothesis proposed in this investigation is that wood retention capacity of boron salts depends mainly on the species and is independent of its density and porosity. Thirty liters of boron salts solution with a concentration of 3 % were prepared, the wood specimens were impregnated by following the “hot-cold bath” method. It was designed an experiment that compared means of the density of wood, the absorption and the retention, as the response variables, assessed for each one of the ten wood species. Wood species was considered as the variation factor. Absorption of Boron salts varied between 136 kg/m3 and 476 kg/m3. Average values of the boron salts retention for all species were higher than  lower retention toxicity limit reported in previous researches (0.2 kg/m3 to 4.7 kg/m3). It was concluded that each species has different boron salts retention. Absorption capacity is specific to each species and it is not related to the wood density.