Elastic asymmetry of PLA material in FDM-printed parts: considerations concerning experimental characterisation for use in numerical simulations
The objective of this research is to characterise the material poly lactic acid (PLA), printed by fused deposition modelling (FDM) technology, under three loading conditions—tension, compression and bending—in order to get data that will allow to simulate structural components. In the absence of spe...
| Autores: | , , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2019 |
| País: | España |
| Institución: | Universitat Politècnica de Catalunya (UPC) |
| Repositorio: | UPCommons. Portal del coneixement obert de la UPC |
| Idioma: | inglés |
| OAI Identifier: | oai:upcommons.upc.edu:2117/174682 |
| Acceso en línea: | https://hdl.handle.net/2117/174682 https://dx.doi.org/10.3390/ma13010015 |
| Access Level: | acceso abierto |
| Palabra clave: | Composite materials Finite element method FDM PLA Mechanical properties Bimodulus materials Standards Finite element analysis (FEA) Materials compostos Elements finits, Mètode dels Àrees temàtiques de la UPC::Enginyeria dels materials |
| Sumario: | The objective of this research is to characterise the material poly lactic acid (PLA), printed by fused deposition modelling (FDM) technology, under three loading conditions—tension, compression and bending—in order to get data that will allow to simulate structural components. In the absence of specific standards for materials manufactured in FDM technology, characterisation is carried out based on ASTM International standards D638, D695 and D790, respectively. Samples manufactured with the same printing parameters have been built and tested; and the tensile, compressive and flexural properties have been determined. The influences of the cross-sectional shape and the specimen length on the strength and elastic modulus of compression are addressed. By analysing the mechanical properties obtained in this way, the conclusion is that they are different, are not coherent with each other, and do not reflect the bimodular nature (different behaviour of material in tension and compression) of this material. A finite element (FE) model is used to verify these differences, including geometric non-linearity, to realistically reproduce conditions during physical tests. The main conclusion is that the test methods currently used do not guarantee a coherent set of mechanical properties useful for numerical simulation, which highlights the need to define new characterisation methods better adapted to the behaviour of FDM-printed PLA |
|---|