Gas Separation Properties of Polyimide Thin Films on Ceramic Supports for High Temperature Applications
[EN] Novel selective ceramic-supported thin polyimide films produced in a single dip coating step are proposed for membrane applications at elevated temperatures. Layers of the polyimides P84 (R), Matrimid 5218 (R), and 6FDA-6FpDA were successfully deposited onto porous alumina supports. In order to...
| Autores: | , , , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2018 |
| País: | España |
| Institución: | Universitat Politècnica de València (UPV) |
| Repositorio: | RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia |
| Idioma: | inglés |
| OAI Identifier: | oai:riunet.upv.es:10251/125581 |
| Acceso en línea: | https://riunet.upv.es/handle/10251/125581 |
| Access Level: | acceso abierto |
| Palabra clave: | Polymer/Ceramic Thin Film Composite Membrane Entanglement concentration Hydrogen Carbon dioxide Gas separation membranes Intrinsic viscosity Polyimides |
| Sumario: | [EN] Novel selective ceramic-supported thin polyimide films produced in a single dip coating step are proposed for membrane applications at elevated temperatures. Layers of the polyimides P84 (R), Matrimid 5218 (R), and 6FDA-6FpDA were successfully deposited onto porous alumina supports. In order to tackle the poor compatibility between ceramic support and polymer, and to get defect-free thin films, the effect of the viscosity of the polymer solution was studied, giving the entanglement concentration (C*) for each polymer. The C* values were 3.09 wt. % for the 6FDA-6FpDA, 3.52 wt. % for Matrimid (R), and 4.30 wt. % for P84 (R). A minimum polymer solution concentration necessary for defect-free film formation was found for each polymer, with the inverse order to the intrinsic viscosities (P84 (R) >= Matrimid (R) >> 6FDA-6FpDA). The effect of the temperature on the permeance of prepared membranes was studied for H-2, CH4, N-2, O-2, and CO2. As expected, activation energy of permeance for hydrogen was higher than for CO2, resulting in H-2/CO2 selectivity increase with temperature. More densely packed polymers lead to materials that are more selective at elevated temperatures. |
|---|