Comparison of Different Technologies for Integrated Solar Combined Cycles: Analysis of Concentrating Technology and Solar Integration

This paper compares the annual performance of Integrated Solar Combined Cycles (ISCCs) using different solar concentration technologies: parabolic trough collectors (PTC), linear Fresnel reflectors (LFR) and central tower receiver (CT). Each solar technology (i.e. PTC, LFR and CT) is proposed to int...

Descripción completa

Detalles Bibliográficos
Autores: Rovira de Antonio, Antonio José, Sánchez, Consuelo, Valdés, Manuel, Abbas, Rubén, Barbero Fresno, Rubén, Montes, María José, Muñoz Domínguez, Marta, Muñoz Antón, Javier, Ortega Ruiz, Guillermo, Varela, Fernando
Tipo de recurso: artículo
Fecha de publicación:2018
País:España
Institución:Universidad de Huelva (UHU)
Repositorio:Arias Montano. Repositorio Institucional de la Universidad de Huelva
Idioma:inglés
OAI Identifier:oai:ariasmontano.uhu.es:10272/15914
Acceso en línea:http://hdl.handle.net/10272/15914
Access Level:acceso abierto
Palabra clave:Integrated solar combined cycle
Parabolic trough collector
Linear Fresnel reflector
Central receiver system
Descripción
Sumario:This paper compares the annual performance of Integrated Solar Combined Cycles (ISCCs) using different solar concentration technologies: parabolic trough collectors (PTC), linear Fresnel reflectors (LFR) and central tower receiver (CT). Each solar technology (i.e. PTC, LFR and CT) is proposed to integrate solar energy into the combined cycle in two different ways. The first one is based on the use of solar energy to evaporate water of the steam cycle by means of direct steam generation (DSG), increasing the steam production of the high pressure level of the steam generator. The other one is based on the use of solar energy to preheat the pressurized air at the exit of the gas turbine compressor before it is introduced in the combustion chamber, reducing the fuel consumption. Results show that ISCC with DSG increases the yearly production while solar air heating reduces it due to the incremental pressure drop. However, air heating allows significantly higher solar-to-electricity efficiencies and lower heat rates. Regarding the solar technologies, PTC provides the best thermal results.