Highly flame retardant melamine-formaldehyde cross-linked cellulose nanofibrils/sodium montmorillonite aerogels with improved mechanical properties
A facile cross-linking strategy to construct flame retardant cellulose nanofibril (CNF)/sodium montmorillonite (MMT) aerogels with improved mechanical properties, by incorporating melamine-formaldehyde (MF) resins into precursor suspensions followed by a freeze-drying process, is reported in this wo...
| Autores: | , , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2018 |
| País: | España |
| Institución: | Universitat Politècnica de Catalunya (UPC) |
| Repositorio: | UPCommons. Portal del coneixement obert de la UPC |
| Idioma: | inglés |
| OAI Identifier: | oai:upcommons.upc.edu:2117/122074 |
| Acceso en línea: | https://hdl.handle.net/2117/122074 https://dx.doi.org/10.1002/mame.201800379 |
| Access Level: | acceso abierto |
| Palabra clave: | Fireproofing agents Aerogels Fire resistant materials Agents ignífugs Materials resistents al foc Àrees temàtiques de la UPC::Enginyeria dels materials |
| Sumario: | A facile cross-linking strategy to construct flame retardant cellulose nanofibril (CNF)/sodium montmorillonite (MMT) aerogels with improved mechanical properties, by incorporating melamine-formaldehyde (MF) resins into precursor suspensions followed by a freeze-drying process, is reported in this work. Scanning electron microscopy images indicate that MF cross-linking does not significantly change the microstructures of CNF and CNF/MMT aerogels. However, the cross-linking improves the materials’ mechanical and flame properties. By incorporating 50 wt% of MF, the compression moduli and compressive stress of CNF aerogels increase by 316% and 114%, respectively. The limiting oxygen index (LOI) value of CNF aerogels also increases from 17.1% to 23.4%. Further addition of MMT increases the CNF aerogels’ LOI value to 57% and increases the maximum decomposition temperature by nearly 20 °C. This occurs because MMT and MF induce a synergistic effect which improves the flame retardant properties of the CNFs aerogels. In CNF/MMT composite aerogels, the introduction of 34 wt% of MF leads to a 54.6% reduction of the peak of heat release rate and a 53.2% decrease in total heat release. CNF aerogels made from sustainable feedstocks with excellent mechanical properties and high flame retardancy, like those discussed herein, show promise as fire resistant biofoams |
|---|