Método simple para determinar el módulo de Young dinámico a partir de una excitación por impacto, aplicado a morteros de cal y cemento
The present work explains a simple method to determine the dynamic Young module (MOE) by inducing a set of small mechanical perturbation to samples of lime and cement mortars and correlating the results obtained with results determined using other techniques and methods. The procedure described here...
| Autores: | , |
|---|---|
| Formato: | artículo |
| Fecha de publicación: | 2011 |
| País: | España |
| Recursos: | Universitat Politècnica de Catalunya (UPC) |
| Repositorio: | UPCommons. Portal del coneixement obert de la UPC |
| Idioma: | español inglés |
| OAI Identifier: | oai:upcommons.upc.edu:2117/131897 |
| Acesso em linha: | https://hdl.handle.net/2117/131897 https://dx.doi.org/10.3989/mc.2010.53509 |
| Access Level: | acceso abierto |
| Palavra-chave: | Mortar lime mortar Young's modulus NDT-non destructive test Morter (Material de construcció) Àrees temàtiques de la UPC::Edificació::Materials de construcció |
| Resumo: | The present work explains a simple method to determine the dynamic Young module (MOE) by inducing a set of small mechanical perturbation to samples of lime and cement mortars and correlating the results obtained with results determined using other techniques and methods. The procedure described herein follows the instructions stated in the UNE-EN ISO 12680-1(8) standard for refractory products although in this study the instructions are applied to standardized RILEM 4x4x16 cm test samples made of lime and cement mortars. In addition, MOE determinations are obtained by using ultrasonic impulse velocity while static Young's modulus determinations are obtained by performing conventional bending tests. The ability of this procedure to correlate with results from other techniques, along with its simplicity, suggests that it can be widely adapted to determine the deformability of mortars under load using standardized samples. |
|---|