Diseño del aislamiento y acondicionamiento acústico de un local en planta baja para actuaciones de grupos rock situado en la población de Oliva (Valencia)
The acoustic insulation refers to the set of actions aimed at obtaining a correct attenuation in the transmission of airborne noise, vibration and impact between the different spaces that integrate a building, and also with the exterior of the building. The acoustic insulation needs to be addressed...
| Autor: | |
|---|---|
| Tipo de recurso: | tesis de maestría |
| Fecha de publicación: | 2013 |
| País: | España |
| Institución: | Universitat Politècnica de València (UPV) |
| Repositorio: | RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia |
| Idioma: | español |
| OAI Identifier: | oai:riunet.upv.es:10251/33579 |
| Acceso en línea: | https://riunet.upv.es/handle/10251/33579 |
| Access Level: | acceso abierto |
| Palabra clave: | Insulation Acoustic conditioning Rock Acondicionamiento acústico Aislamiento acústico FISICA APLICADA Máster Universitario en Ingeniería Acústica-Màster Universitari en Enginyeria Acústica |
| Sumario: | The acoustic insulation refers to the set of actions aimed at obtaining a correct attenuation in the transmission of airborne noise, vibration and impact between the different spaces that integrate a building, and also with the exterior of the building. The acoustic insulation needs to be addressed in the design phase and construction of the building because once built any significant improvement in it will be much more complicated and more expensive. Another important aspect in the room acoustics will be the conditioning acoustic that deals with the definition of the forms and wall coverings, ceilings, and floors inside an enclosure in order to get the acoustic conditions more suitable for the type of activity that is intended for your use. In this final work of Master is carried out a project of insulation and conditioning from a building on the ground floor of 180 m² for performances of groups live rock. On the basis of the constructive characteristics of the initial building and with the help of the software AISLA V. 3.0 has been designed acoustic insulation required of the enclosure, defining in detail each acoustical solution adopted to comply the applicable legislation and standards. Similarly, in response to the acoustic parameters of quality desired for the type of proceedings which are to be performed on campus, the acoustic conditioning has been simulated with the help of the software Catt Acoustic by defining the geometric shape of its coatings, as well as detailing the material from which they are manufactured. |
|---|