Direct current control for grid connected multilevel inverters
Control schemes for inverters of different topologies and various numbers of voltage levels are of great interest for many standard as well as special applications. This thesis describes a novel, robust and high-dynamic direct current control scheme for multilevel voltage source inverters. lt is hig...
| Autor: | |
|---|---|
| Tipo de recurso: | tesis doctoral |
| Estado: | Versión publicada |
| Fecha de publicación: | 2017 |
| País: | España |
| Institución: | CBUC, CESCA |
| Repositorio: | TDR. Tesis Doctorales en Red |
| OAI Identifier: | oai:www.tdx.cat:10803/461716 |
| Acceso en línea: | http://hdl.handle.net/10803/461716 https://dx.doi.org/10.5821/dissertation-2117-114227 |
| Access Level: | acceso abierto |
| Palabra clave: | Àrees temàtiques de la UPC::Enginyeria elèctrica 621.3 |
| Sumario: | Control schemes for inverters of different topologies and various numbers of voltage levels are of great interest for many standard as well as special applications. This thesis describes a novel, robust and high-dynamic direct current control scheme for multilevel voltage source inverters. lt is highly independent from load parameters and universally applicable. The new control method is examined and validated with real measurements . The aim of the thesis is to establish and prove a new concept of a direct current control algorithm for multilevel inverter topologies for grid connected systems. This application is characterized by unknown grid conditions including failure modes and other distortions, complex inverter topologies and a large variety and complexity of current control algorithms for multilevel inverters. Therefore the complexity of the system needs to be reduced. Additionally , the advantages of multilevel inverters and the dynamic performance and robustness of direct current control techniques shall be combined. Starting from a detailed literature study on inverter topologies and direct as well as indirect current control methods, the thesis includes three chapters containing relevant contributions to the achievement of the objectives. A method reducing the control-complexity of multilevel converters has been developed. The simplification method is based on a transformation that converts any three-phase voltage (or current) into a non-orthogonal coordinate system. This choice minimizes the complexity and effort to determine the location of those discrete voltage space vectors directly surrounding the required reference voltage vector. A further improvement is achieved by scaling all coordinates to integer values. This is advantageous for further calculations on microprocessors or FPGA based control systems. The main contribution of this thesis is a new direct current control method minimizing the disadvantages of existing direct methods. At the same time advantages of other control algorithms shall be applied. The new method is based on a simple mathematical equation, that is, the solution of a scalar product, to always select the one inverter output voltage vector best reducing the actual current error. This results in the designation "Scalar Hysteresis Control - SHC". An advanced seeking algorithm ensures robust current control capability even in case of unknown, unsymmetrical or changing loads, in case of rapid set-point changes or in cases of unknown phase voltages . The new method therefore shows excellent properties in terms of simplicity , robustness, dynamics and independence from the inverter level count and the hardware topology . The properties of the control method are verified by means of simulations and real measurements on two-, three- and five-level inverters over the complete voltage operating range. Finally, all contributions are collected together and assessed with regard to the objectives. From the proposed control method new opportunities for future work, further developments and extensions are evolving for continuing scientific research |
|---|