Beryllium film deposition in cavity samples in remote areas of the JET divertor during the 2011-2012 ITER-like wall campaign
Beryllium film deposition was studied with cavity samples in remote areas of the inner and outer JET divertor and below divertor tile 5 during the 2011–2012 campaign with the ITER-like wall. Predominantly beryllium films were formed inside the cavities with some additional carbon, the ratio Be/C was...
| Autores: | , , , , , , |
|---|---|
| Formato: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2017 |
| País: | España |
| Recursos: | Universidad de Sevilla (US) |
| Repositorio: | idUS. Depósito de Investigación de la Universidad de Sevilla |
| OAI Identifier: | oai:idus.us.es:11441/100411 |
| Acesso em linha: | https://hdl.handle.net/11441/100411 https://doi.org/10.1016/j.nme.2016.12.005 |
| Access Level: | acceso abierto |
| Palavra-chave: | Deuterium Beryllium Co-deposition JET |
| Resumo: | Beryllium film deposition was studied with cavity samples in remote areas of the inner and outer JET divertor and below divertor tile 5 during the 2011–2012 campaign with the ITER-like wall. Predominantly beryllium films were formed inside the cavities with some additional carbon, the ratio Be/C was > 2. These deposited layers had high D/(Be + C) ratios of about 0.3. The formation of these films is mainly due to sticking of beryllium-containing particles with low sticking coefficients < 0.5. The observed surface loss probabilities depend on the position in the divertor. The particles responsible for film deposition originated from the location of in the divertor strike points. |
|---|