Next generation optical access networks and coexistence with legacy PONs
Nowadays, Fiber-to-the-Home is one of the most promising solutions to provide broadband services in access networks. However, the fiber is inefficiently used as most of the deployed systems are still based on Time Division Multiplexing Passive Optical Networks (TDM-PONs) providing shared transmissio...
| Autor: | |
|---|---|
| Tipo de recurso: | tesis doctoral |
| Estado: | Versión publicada |
| Fecha de publicación: | 2019 |
| País: | España |
| Institución: | CBUC, CESCA |
| Repositorio: | TDR. Tesis Doctorales en Red |
| OAI Identifier: | oai:www.tdx.cat:10803/667428 |
| Acceso en línea: | http://hdl.handle.net/10803/667428 https://dx.doi.org/10.5821/dissertation-2117-167842 |
| Access Level: | acceso abierto |
| Palabra clave: | 621.3 |
| Sumario: | Nowadays, Fiber-to-the-Home is one of the most promising solutions to provide broadband services in access networks. However, the fiber is inefficiently used as most of the deployed systems are still based on Time Division Multiplexing Passive Optical Networks (TDM-PONs) providing shared transmission capacities up to 2.5 Gb/s down and 1.25 Gb/s up, among multiple users. Research on high-speed electronics and Wavelength Division Multiplexing (WDM) has allowed the emergence of what is known as the second generation PON (NG-PON2), which specify aggregated capacities up to 40 Gb/s, stacking four channels at symmetric data rates of 10 Gb/s each, for residential scenarios. Nevertheless, the capacity per channel is still shared between multiple users due to the use of TDM. Moreover, the optical spectrum efficiency is low because channels are widely spaced (50 to 100 GHz). In addition, the sensitivity, reach and number of users is limited as consequence of using direct detection (DD) systems. In consequence, and due to the increase in bandwidth demands of new multimedia applications, it is necessary to propose solutions that cope with this tendency and, even more important, that can coexist with legacy systems, being one of the major requirements of network operators to guarantee a smooth and non-disruptive technology migration. In this thesis, a breakthrough technology such as Ultra-Dense WDM (UDWDM) that allows to allocate a large number of channels spaced only by a few GHz is used. This approach consent to envision the concept of Wavelength-to-the-User, where each costumer can be served with dedicated bandwidth links. The key technologies are based on coherent systems, with inherent wavelength selectivity and improved sensitivity compared to DD systems, thanks to the booster action of a tunable local oscillator (LO) laser. Because of cost is the main constraint in access networks, especially at the customer premises equipment (Optical Network Unit - ONU), in this thesis, a new class of coherent transceivers, based on low-cost direct modulated lasers and simplified receiver schemes, are proposed and experimentally tested. Moreover, the issue of coexistence is investigated through theoretical studies and real-time implementations, demonstrating full compatibility with legacy systems. Between the proposed solutions, a simple technique to adjust digitally the direct phase modulation of a distributed feedback (DFB) laser is presented to support flexible transmission rates. Next, several multilevel phase modulation formats for achieving higher transmission rates and better spectral efficiency are experimentally compared. Subsequently, the topic of photonic integration is addressed, demonstrating for the first time an 8-ary hybrid amplitude and phase modulated transmitter (Tx), by using a low-cost, small-footprint and energy efficient dual electro-absorption modulated laser (DEML). Finally, two novel proposals, to reduce the complexity of heterodyne and intradyne detection, are provided to face the typical issue of complexity and high-cost of coherent systems. The former explores the possibility of using only one DFB laser as LO and Tx at the ONU. The later demonstrates for the first time, a novel phase time diversity technique alternating phase modulation at each complex component (in-phase - I and quadrature - Q) achieving a 10 Gb/s' transmission with polarization independence. |
|---|