High thermal stability of microwave sintered low-er beta-eucryptite materials
Low-temperature sinterable microwave LiAlSiO4-based solid-state material was investigated with regard to microwave dielectric properties as functions of the sintering temperature. beta-eucryptite materials and alumina-reinforced beta-eucryptite composites were sintered by microwave technology at 110...
| Autores: | , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2015 |
| País: | España |
| Institución: | Universitat Politècnica de València (UPV) |
| Repositorio: | RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia |
| Idioma: | inglés |
| OAI Identifier: | oai:riunet.upv.es:10251/77586 |
| Acceso en línea: | https://riunet.upv.es/handle/10251/77586 |
| Access Level: | acceso abierto |
| Palabra clave: | Microwave processing Microstructure-final Dielectric properties Thermal expansion Ceramics TEORIA DE LA SEÑAL Y COMUNICACIONES CIENCIA DE LOS MATERIALES E INGENIERIA METALURGICA |
| Sumario: | Low-temperature sinterable microwave LiAlSiO4-based solid-state material was investigated with regard to microwave dielectric properties as functions of the sintering temperature. beta-eucryptite materials and alumina-reinforced beta-eucryptite composites were sintered by microwave technology at 1100 degrees C and 1200 degrees C. The combination of fast heating and the dramatic reduction in cycle time, along with the non-conventional heating source, opens the way to produce materials with desired multifunctional properties. The microstructure and crystalline composition of the materials were characterised, and the mechanical, thermal and microwave dielectric behaviours were analysed. X-ray diffraction showed good chemical stability in materials without between-phase reactions during the microwave sintering process. The excellent mechanical (similar to 8 GPa of hardness and similar to 100 GPa of Young's modulus), thermal (-0.23. 10(-6) K-1) and microwave dielectric properties (epsilon(r)= 4.10; Q=1494) were obtained from the LAS/Al2O3 composites sintered at a very low temperature (1100 degrees C). The results achieved show the possibility of designing ceramic nanocomposites at low sintering temperatures using microwave technology with near-zero thermal expansion coefficients, high mechanical and chemical stability and low dielectric properties. |
|---|