Assessment of ion-exchange resins as catalysts for the direct transformation of fructose into butyl levulinate
The transformation of fructose into butyl levulinate in aqueous 1-butanol (initial molar ratio 1-butanol/fructose 79, and butanol/water 1.19) has been studied in a discontinuous reactor at 80-120C and 2.0 MPa over 8 sulfonic polystyrene-DVB ion exchange resins as catalysts (catalyst loading 0.85-3....
| Autores: | , , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión aceptada para publicación |
| Fecha de publicación: | 2021 |
| País: | España |
| Institución: | Varias* (Consorci de Biblioteques Universitáries de Catalunya, Centre de Serveis Científics i Acadèmics de Catalunya) |
| Repositorio: | Recercat. Dipósit de la Recerca de Catalunya |
| OAI Identifier: | oai:recercat.cat:2445/173332 |
| Acceso en línea: | https://hdl.handle.net/2445/173332 |
| Access Level: | acceso abierto |
| Palabra clave: | Resines de bescanvi iònic Fructosa Catàlisi Ion exchange resins Fructose Catalysis |
| Sumario: | The transformation of fructose into butyl levulinate in aqueous 1-butanol (initial molar ratio 1-butanol/fructose 79, and butanol/water 1.19) has been studied in a discontinuous reactor at 80-120C and 2.0 MPa over 8 sulfonic polystyrene-DVB ion exchange resins as catalysts (catalyst loading 0.85-3.4%). Resins swell greatly in the reaction medium and the reaction takes place mainly in the swollen gel-phase. Swollen resins in water have been characterized by analysis of ISEC data, and spaces originated in the gel phase upon swelling are described in terms of zones of different polymer density. A relationship has been found between the morphology of swollen resins and ester production. Swollen resins with low polymer density show the highest butyl levulinate yield. Dowex 50Wx2 was the most effective because it creates the largest and widest spaces in the gel-phase when swelling. Consequently, it better accommodates the proton-transfer-reaction mechanisms |
|---|