Development of rice protein biobased plastic materials processed by injection molding
Rice protein concentrate (RPC) has been evaluated as a potential candidate for the development of bio-based plastic materials processed by injection molding. Around 30% of glycerol (GL) as plasticizer and other additives (sodium bisulfite as a reducing agent as well as glyoxal and L-cysteine as cros...
| Autores: | , , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión aceptada para publicación |
| Fecha de publicación: | 2016 |
| País: | España |
| Institución: | Universidad de Sevilla (US) |
| Repositorio: | idUS. Depósito de Investigación de la Universidad de Sevilla |
| OAI Identifier: | oai:idus.us.es:11441/172706 |
| Acceso en línea: | https://hdl.handle.net/11441/172706 https://doi.org/10.1016/j.indcrop.2015.11.028 |
| Access Level: | acceso abierto |
| Palabra clave: | Bioplastic Dynamic mechanical thermal analysis Rice proteins Tensile strength test |
| Sumario: | Rice protein concentrate (RPC) has been evaluated as a potential candidate for the development of bio-based plastic materials processed by injection molding. Around 30% of glycerol (GL) as plasticizer and other additives (sodium bisulfite as a reducing agent as well as glyoxal and L-cysteine as cross-linking agents) were required to obtain good processability of RPC/GL blends to produce bioplastics. A mixing rheometer that allows recording of torque and temperature during mixing and a small-scale-plunger-type injection molding machine were used to obtain RPC/GL blends and RPC-based bioplastics, respectively. Rheological measurements were taken to guide the selection of suitable conditions for injection and molding. For injection, we selected a temperature relatively close to the glass transition temperature, but moderate enough to avoid crosslinking effects (87 °C), while for molding, we selected a higher temperature (130 °C) to favor crosslinking in the mold. However, other processing parameters (e.g., injection pressure) also need to be optimized. Final products (bioplastics) are plastic materials from renewable polymers (rice proteins) with both adequate properties for important industrial applications such as packaging, agriculture, etc. and high biodegradability when subjected to composting conditions. Adding each of the aforementioned additives leads to final specimens with different mechanical properties, as shown by dynamic mechanical temperature analysis and tensile strength measurements. |
|---|