Assessment of size aspects in modelling molten fuel coolant interaction.
Severe accidents in light water nuclear reactors occur when reactor vessel water inventory decreases and there is no available additional water coolant to be delivered into the core. In general, during an extended severe accident sequence a period exists in which the reactor core, after a partial or...
| Autor: | |
|---|---|
| Formato: | tesis doctoral |
| Estado: | Versión publicada |
| Fecha de publicación: | 2004 |
| País: | España |
| Recursos: | CBUC, CESCA |
| Repositorio: | TDR. Tesis Doctorales en Red |
| OAI Identifier: | oai:www.tdx.cat:10803/6608 |
| Acesso em linha: | http://www.tdx.cat/TDX-1009106-103825 http://hdl.handle.net/10803/6608 https://dx.doi.org/10.5821/dissertation-2117-93919 |
| Access Level: | acceso abierto |
| Palavra-chave: | Àrees temàtiques de la UPC::Energies::Energia nuclear::Centrals nuclears 621 |
| Resumo: | Severe accidents in light water nuclear reactors occur when reactor vessel water inventory decreases and there is no available additional water coolant to be delivered into the core. In general, during an extended severe accident sequence a period exists in which the reactor core, after a partial or total melt down, is poured into the lower plenum that can have some water present. The study of the interaction of the melt fuel with the water is the objective of MFCI (Melt Fuel Coolant Interaction) activities.<br/><br/>MFCI is one of the most important issues awaiting resolution in water cooled reactor safety analysis. The progression of a severe accident in a water cooled reactor can lead to energetic (steam explosion) or non-energetic (melt quenching) interactions as the molten fuel relocates and eventually interacts with the coolant either in the vessel lower head (in vessel) or in the cavity (ex-vessel).<br/><br/>The MFCI experiments at JRC Ispra site were conducted in the FARO (Furnace And Release Oven) test facility under realistic melt composition and prototypical accident conditions to provide basic information on underlying phenomena. The experimental programme was complemented by comprehensive pre-test and post-test analytical activities based on the development and application of the thermalhydraulic COMETA (COre MElt Thermalhydraulic Analysis) code. The code is developed and assessed on the basis of experimental information acquired in the FARO facility tests, and there are some limitations and uncertainties in their application to the full plant, which need to be identified and possibly quantified.<br/><br/>In general the main objective of the PhD research was achieved expanding the general knowledge in Melt Fuel Coolant Interaction. The knowledge was complemented collaborating and complementing the application of COMETA code under conditions not experimented before, developing and improving COMETA code sources and verifying the code consistency, analysing and unifying the COMETA simulations carried so far.<br/><br/>Also a further analytical study was carried out in order to illustrate the MFCI inside the general overview of a NPP (Nuclear Power Plant) severe accident sequence. |
|---|