RF-EMF exposure assessment with add-on uplink exposure sensor in different microenvironments in seven European countries
Several devices have been developed to assess exposure to radiofrequency electromagnetic field (RF-EMF). Since the existing solutions to measure the personal exposure induced by emerging 5G New Radio (NR) are expensive, complex, and bulky, a new cost efficient and low-complexity sensor is developed,...
| Autores: | , , , , , , , , , , , , |
|---|---|
| Tipo de recurso: | conjunto de datos |
| Fecha de publicación: | 2025 |
| País: | España |
| Institución: | Consorci de Serveis Universitaris de Catalunya (CSUC) |
| Repositorio: | CORA.Repositori de Dades de Recerca |
| OAI Identifier: | oai:dnet:cora.rdr____::4adbe2541d1cf9f35f915db3569a16bc |
| Acceso en línea: | https://doi.org/10.34810/DATA2274 |
| Access Level: | acceso abierto |
| Palabra clave: | Medicine, Health and Life Sciences Uplink Transmit power 4G 5G Radiofrequency electromagnetic fields Exposure Microenvironments Electromagnetic Radiation Electromagnetic Fields Environmental Exposure Radiation Exposure Cell Phone Smartphone Cell Phone Use Europe |
| Sumario: | Several devices have been developed to assess exposure to radiofrequency electromagnetic field (RF-EMF). Since the existing solutions to measure the personal exposure induced by emerging 5G New Radio (NR) are expensive, complex, and bulky, a new cost efficient and low-complexity sensor is developed, that aims to measure RF-EMF exposure in different scenarios of data transmission within different areas. With this novel sensor, activity-based microenvironmental surveys were conducted across seven European countries: Belgium, Hungary, Italy, Poland, Switzerland, the Netherlands, and the United Kingdom. The device is attached to a smartphone to quantify the auto-induced uplink (a-UL) transmission component of the total exposure for a broadband frequency range from 100 MHz to 6000 MHz and is thus denoted as add-on sensor. In-situ measurements were performed for three usage scenarios, namely non-user (i.e., environmental exposure), maximum downlink (max DL), and maximum uplink (max UL) scenarios, in a large city, a secondary city, and three rural villages a priori selected within each country. Power levels were lowest in non-user scenarios (median: −2.64 dBm or 0.54 mW), increasing by a factor of 5.00 dB in maximum downlink scenarios and by a factor of 14.15 dB in maximum uplink scenarios. In the maximum uplink scenarios, the highest median a-UL power of 18.68 dBm (= 73.79 mW) was recorded in The Netherlands, while the lowest median a-UL power of 4.77 dBm (= 3 mW) was observed in the UK. The analysis of the measured data showed a prominent trend of a 2.72 dB lower power in the cities compared to the villages. Further comparisons were made based on microenvironment groups, where the lowest a-UL power levels (median: 12.35 dBm) were measured in outdoor areas, with an increase of 1.78 dB and 1.91 dB in power was measured compared to public transport and public places, respectively. This study compares RF-EMF power levels between different countries, urbanization settings, and usage scenarios, which is important for future epidemiological studies. |
|---|