Properties of superelastic nickel–titanium wires after clinical use

The aim of the present study was to describe and determine changes in the superelastic properties of NiTi archwires after clinical use and sterilization. Ten archwires from five different manufacturers (GAC, 3M, ODS, GC, FOR) were cut into two segments and evaluated using a three-point bending test...

ver descrição completa

Detalhes bibliográficos
Autores: Alcaraz, Inés, Moyano, Javier, Pàmies, Ariadna, Ruiz, Guillem, Artés, Montserrat, Gil, FJ, Puigdollers, Andreu
Formato: artículo
Fecha de publicación:2023
País:España
Recursos:Varias* (Consorci de Biblioteques Universitáries de Catalunya, Centre de Serveis Científics i Acadèmics de Catalunya)
Repositorio:Recercat. Dipósit de la Recerca de Catalunya
OAI Identifier:oai:recercat.cat:20.500.12328/3815
Acesso em linha:http://hdl.handle.net/20.500.12328/3815
https://dx.doi.org/10.3390/ma16165604
Access Level:acceso abierto
Palavra-chave:NiTi
Superelasticitat
Esterilització
Propietats mecàniques
Superelasticidad
Esterilización
Propiedades mecánicas
Superelasticity
Sterilization
Mechanical properties
616.3
Descrição
Resumo:The aim of the present study was to describe and determine changes in the superelastic properties of NiTi archwires after clinical use and sterilization. Ten archwires from five different manufacturers (GAC, 3M, ODS, GC, FOR) were cut into two segments and evaluated using a three-point bending test in accordance with ISO 14841:2006. The center of each segment was deflected to 3.1 mm and then unloaded to 0 N to obtain a load–deflection curve. Deflection at the end of the plateau and forces at 3, 2, 1 and 0.5 mm on the unloading curve were recorded. Plateau slopes were calculated at 2, 1 and 0.5 mm of deflection. Data obtained were statistically analyzed to determine differences (p < 0.001). Results showed that the degree of superelasticity and exerted forces differed significantly among brand groups. After three months of clinical use, FOR released a greater force for a longer activation period. GC, EURO and FOR archwires seemed to lose their mechanical properties. GC wires released more force than other brand wires after clinical use. Regarding superelasticity after sterilization, GAC, 3M and FOR wires recovered their properties, while EURO archwires lost more.