Natural magnetite as an effective and long-lasting catalyst for CWPO of azole pesticides in a continuous up-flow fixed-bed reactor
The global occurrence of micropollutants in water bodies has raised concerns about potential negative efects on aquatic ecosystems and human health. EU regulations to mitigate such widespread pollution have already been implemented and are expected to become increasingly stringent in the next few ye...
| Autores: | , , , |
|---|---|
| Formato: | artículo |
| Fecha de publicación: | 2024 |
| País: | España |
| Recursos: | Universidad Autónoma de Madrid |
| Repositorio: | Biblos-e Archivo. Repositorio Institucional de la UAM |
| Idioma: | inglés |
| OAI Identifier: | oai:repositorio.uam.es:10486/711710 |
| Acesso em linha: | http://hdl.handle.net/10486/711710 https://dx.doi.org/10.1007/s11356-024-33065-8 |
| Access Level: | acceso abierto |
| Palavra-chave: | Azole Pesticides Fixed-Bed Reactor Magnetite Decision 2022/1307 CWPO Química |
| Resumo: | The global occurrence of micropollutants in water bodies has raised concerns about potential negative efects on aquatic ecosystems and human health. EU regulations to mitigate such widespread pollution have already been implemented and are expected to become increasingly stringent in the next few years. Catalytic wet peroxide oxidation (CWPO) has proved to be a promising alternative for micropollutant removal from water, but most studies were performed in batch mode, often involving complex, expensive, and hardly recoverable catalysts, that are prone to deactivation. This work aims to demonstrate the feasibility of a fxed-bed reactor (FBR) packed with natural magnetite powder for the removal of a representative mixture of azole pesticides, recently listed in the EU Watch Lists. The performance of the system was evaluated by analyzing the impact of H2O2 dose (3.6–13.4 mg L−1), magnetite load (2–8 g), inlet fow rate (0.25–1 mL min−1), and initial micropollutant concentration (100–1000 µg L−1) over 300 h of continuous operation. Azole pesticide conversion values above 80% were achieved under selected operating conditions (WFe3O4=8 g, [H2O2]0=6.7 mg L−1, fow rate=0.5 mL min−1, pH0=5, T=25 °C) |
|---|