Novel housing designs for nanofiltration and ultrafiltration gravity-driven recycled membrane-based systems
Ultra-low pressure gravity-driven membrane (GDM) systems have the potential to be significantly less costly and complex than conventional membranes for water treatment applications. To build upon this inherent advantage, this study assesses the reuse of recycled membranes in GDM systems for producin...
| Autores: | , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión aceptada para publicación |
| Fecha de publicación: | 2021 |
| País: | España |
| Institución: | Varias* (Consorci de Biblioteques Universitáries de Catalunya, Centre de Serveis Científics i Acadèmics de Catalunya) |
| Repositorio: | Recercat. Dipósit de la Recerca de Catalunya |
| OAI Identifier: | oai:recercat.cat:10256/19180 |
| Acceso en línea: | http://hdl.handle.net/10256/19180 |
| Access Level: | acceso abierto |
| Palabra clave: | Osmosi inversa Reverse osmosis Membranes (Tecnologia) Membranes (Technology) Aigües residuals -- Depuració -- Osmosi inversa Sewage -- Purification -- Reverse osmosis process Aigua potable Drinking water |
| Sumario: | Ultra-low pressure gravity-driven membrane (GDM) systems have the potential to be significantly less costly and complex than conventional membranes for water treatment applications. To build upon this inherent advantage, this study assesses the reuse of recycled membranes in GDM systems for producing drinking water. Two reverse osmosis spiral-wound modules were recycled into nanofiltration (NF)-like and ultrafiltration (UF)-like membranes via controlled exposure to free chlorine. To operate the recycled membranes, two housing devices, based on a simple fitting and an advanced end-caps design, were developed. The recycled membrane systems were tested under a range of conditions (submerged vs. external system configuration and continuous vs. intermittent filtration mode). Synthetic river water feed solutions were used in the tests where performance, fouling, and clogging were measured. NF-like recycled membranes resulted in poor salt rejection and low permeability (~1.7 L m−2 h−1 bar−1), but also in high rejection (>81%) of dissolved organic carbon. UF-like recycled membranes maintained their capacity to reject biopolymers (BP) (>74%) and featured up to 18-fold higher permeate rate than NF-like recycled membranes. The optimized operating conditions were found when the recycled membranes were housed in the end-caps device and operated intermittently (relaxation time plus forward flushing). Flushing reduced the fouling accumulation inside the membrane (only 12% and 40% of BP accumulation was observed in the NF-like and UF-like, respectively). However, the end-caps-based device was estimated to be more expensive during the economic analysis. To address this techno-economic trade-off, a decision-making tree was developed to select the appropriate configuration based upon the implementation context. Overall, this study concludes that these designs can serve as robust, low-cost (water production cost <1 USD ct. yr. L−1), and light-weight GDM alternatives. This study is beneficial for developing compact GDM systems based on recycled spiral-wound membranes for both rural areas and emergency response |
|---|