Development of a Modular Bionic Hand with Intuitive Control and Thumb Opposition
[EN] Background/Objectives: Hand loss or severe impairment significantly reduces quality of life by restricting essential daily activities and professional tasks. Despite advances in prosthetics, challenges remain in affordability, accessibility, and usability. This study aimed to design and develop...
| Autores: | , , , |
|---|---|
| Formato: | artículo |
| Fecha de publicación: | 2026 |
| País: | España |
| Recursos: | Universitat Politècnica de València (UPV) |
| Repositorio: | RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia |
| Idioma: | inglés |
| OAI Identifier: | oai:dnet:riunet______::a854fae92d3e9f867976bf3e9b4e9bf2 |
| Acesso em linha: | https://riunet.upv.es/handle/10251/234935 |
| Access Level: | acceso abierto |
| Palavra-chave: | Prosthetic hand Bionic hand Affordable prosthesis 3D printing Intuitive control Rehabilitation User-centred design Modular electronics Assistive technology |
| Resumo: | [EN] Background/Objectives: Hand loss or severe impairment significantly reduces quality of life by restricting essential daily activities and professional tasks. Despite advances in prosthetics, challenges remain in affordability, accessibility, and usability. This study aimed to design and develop a low-cost, ergonomic bionic hand prototype that integrates sustainable fabrication, intuitive control, and modular electronics. Methods: A user-centred design process guided by iterative prototyping, anatomical modelling, and functional validation. The prototype was manufactured using 3D printing techniques and assembled with modular electronic components. The design included segmented fingers, independent thumb articulation, and a tendon-like actuation system driven by micro-motors. Control was implemented through an ESP32-based board and a Bluetooth-enabled mobile application. Durability was preliminarily assessed through 500 grasp-release cycles. Results: Experimental validation confirmed the feasibility of both precision and power grips. The pinch grip successfully lifted objects to 120 g, and the power grip up to 85 g, corresponding to effective output forces of approximately 1.2 N and 0.83 N, respectively. The final prototype weighed similar to 350 g and maintained reliable performance during 500 grasp-release cycles. Conclusions: The developed bionic hand demonstrates that an affordable, ergonomic, and functional prosthetic can be achieved through sustainable 3D printing and accessible electronics. Future work will focus on enhancing actuation strength, long-term durability, and integration of sensory feedback, with the long-term objective of clinical testing and scalable production. |
|---|