Flexural creep of steel fiber reinforced concrete in the cracked state
This paper aims at assessing the effect of a number of variables on flexural creep of steel fiber reinforced concrete in its cracked state, namely: fiber geometry (slenderness and length), fiber content, concrete compressive strength, maximum aggregate size, and flexural load. Notched prismatic spec...
| Autores: | , , , |
|---|---|
| Formato: | artículo |
| Fecha de publicación: | 2014 |
| País: | España |
| Recursos: | Universitat Politècnica de València (UPV) |
| Repositorio: | RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia |
| Idioma: | inglés |
| OAI Identifier: | oai:riunet.upv.es:10251/51776 |
| Acesso em linha: | https://riunet.upv.es/handle/10251/51776 |
| Access Level: | acceso abierto |
| Palavra-chave: | Bending Concrete Creep Cracked state Steel fiber Test INGENIERIA DE LA CONSTRUCCION |
| Resumo: | This paper aims at assessing the effect of a number of variables on flexural creep of steel fiber reinforced concrete in its cracked state, namely: fiber geometry (slenderness and length), fiber content, concrete compressive strength, maximum aggregate size, and flexural load. Notched prismatic specimens have been subjected to sustained flexural loads for 90 days following a test setup and methodology developed by the authors. Several experimental outputs have been measured: initial crack width, crack width at 90 days, and crack opening rates and creep coefficients at 14, 30, and 90 days. Multiple linear regression has been applied to relate these creep parameters to the variables considered. Semi-empirical equations have been obtained for these parameters. Statistical inference has been applied to identify the variables that have a statistically significant effect on SFRC flexural creep response. Fiber slenderness and fiber content have been found to significantly modify the effect that load ratio has on flexural creep response of SFRC. |
|---|